APKJ AP-HX-50C programmable Humidity Chamber 7 inch touch screen

Name: APKJ AP-HX-50C programmable Humidity Chamber 7 inch touch screen
Brand: Apkjgroup
SKU: NB042324
Price: 4391.0 USD
Availability: InStock

$ 4391.00Ex works

Equipped with a 7-inch touch controller, it supports 120 programs and 100 settings; Temperature range -40~ 150 ° C, humidity control 20~ 98% RH; multi-wing air supply circulation ensures uniform temperature and humidity, with perfect safety protection device.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042324

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-50C programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production, and inspection. The device adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, with 120 sets of programs and 100 segments per set of programming capabilities, and supports USB data export and RS232 communication functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments of programming 2. Remote control can be achieved by connecting to the computer through the LAN interface 3. Utilize a multi-wing blower for strong air circulation to ensure uniform indoor temperature and humidity distribution 4. Equipped with complete safety protection devices, the status is automatically displayed in the event of a failure and troubleshooting methods are provided 5. Adopt original imported Compressor sets, including French Taikang and Japanese Hitachi brands 6. Studio volume 50L, Temperature range -40~ 150 ℃, Moisture control range 20~ 98% R.H

Principle

The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. The multi-wing blower is used to strongly circulate the air to avoid any dead ends and make the indoor temperature and humidity evenly distributed. The refrigeration system adopts the original imported Compressor, the 0 ℃~ -40 ℃ model adopts one-stage compression, and the -40 ℃~ -70 ℃ adopts binary cascade refrigeration.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C

Steps

1. Configure the corresponding capacity air or power switch 2. Connect the AC220V power supply, requiring single-phase two-wire + protective ground wire 3. Design programs through the controller or import existing programs 4. Set the program loop mode and end action 5. Start the equipment for testing 6. Export test data via USB interface

Notice

○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens ○ Prohibition of testing or storage of samples of corrosive substances Prohibition of testing or storage of biological samples Prohibition of testing or storage of samples of strong electromagnetic emission sources ○ No strong vibration around the equipment, the ground is flat and well ventilated No strong electromagnetic field around the equipment, no flammable, explosive, corrosive substances and dust ○ Leave appropriate use and maintenance space around the equipment ○ power requirements: voltage range AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz, protective ground resistance less than 4Ω

Interior Volume
50L
Temperature Range
-40~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
350*400*350mm
Dimension
650 * 1550 * 1200Mm (W * H * D) The actual Size shall prevail
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] I need a test chamber that can simulate high and low temperature environments to test the reliability of electronic components. Do you have any recommendations?

Recommend a programmable constant temperature and humidity test chamber. It features a 7-inch large touch screen controller, which is intuitive to operate and capable of setting complex temperature variation programs, making it suitable for simulating the harsh environments that electronic components may encounter in actual use. Its temperature range covers -40°C to 150°C, with a humidity range of 20% to 98% RH. It offers precise control over uniformity and fluctuation, ensuring the reliability of test results.

[Q] In our laboratory, we want to conduct temperature and humidity cycle testing on new chemical materials. What are the key points to consider when selecting this type of equipment?

For testing chemical materials, the core focus is on the temperature and humidity control accuracy and stability of the equipment. It is recommended to pay attention to temperature uniformity (e.g., within ±2°C), humidity deviation (e.g., ±2% RH), as well as heating and cooling rates. This device adopts a multi-wing forced air circulation system to avoid testing dead zones and ensure uniform conditions inside the chamber. Additionally, it supports program linking and cycling, enabling precise reproduction of your set temperature and humidity change curves to meet testing requirements such as material aging and performance evaluation.

[Q] The equipment needs to operate continuously for extended periods and also be capable of remote data monitoring. How should I choose the features?

For long-term operation and remote monitoring, it is recommended to select models that support network communication and robust data management functions. Devices equipped with LAN or RS485 communication interfaces are preferred, as they can be directly connected to a computer for remote programming, data acquisition, and power control. It is also advisable for the controller to be capable of storing a large number of program groups and data, and to support exporting historical records via a USB drive. This not only facilitates real-time monitoring but also eases subsequent data analysis and report generation.

CATEGORIES