APKJ AP-HX-50D programmable Humidity Chamber high and low temperature alternating test

Name: APKJ AP-HX-50D programmable Humidity Chamber high and low temperature alternating test
Brand: Apkjgroup
SKU: NB042325
Price: 5969.0 USD
Availability: InStock

$ 5969.00Ex works

Adopt a cascade refrigeration system to achieve a low temperature of -70 ° C, equipped with a 7-inch touch screen to support 120 sets of program editing, multi-wing air supply to ensure a uniform temperature and humidity of +/- 2 ° C, with data export and remote control functions.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042325

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-50D programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, with 120 sets of program control capabilities, 100 segments per set of programs, and supports program cycle, connection and data export functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Remote control can be achieved by connecting to the computer through the LAN interface 3. The multi-wing blower has strong air circulation to ensure uniform distribution of temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing Troubleshooting methods 5. Using the original imported Compressor (France Taikang or Japan Hitachi), the refrigeration system is stable and reliable 6. Studio volume 50L, Temperature range -60~ 150 ℃, Moisture control range 20~ 98% R.H

Principle

The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. The multi-wing blower is used to carry out strong air supply circulation, and the refrigeration system and heating system are used to precisely control the temperature and humidity environment in the working room. The controller collects temperature and humidity data through Sensor, and controls the operation of each executive component after program operation to realize the preset test conditions.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012

Steps

1. Configure the corresponding capacity air or power switch to ensure independent power supply 2. Connect the AC 220V power supply to ensure the voltage range AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz 3. Protective ground wire grounding resistance is less than 4Ω 4. Set the test program and parameters through the controller 5. Start the equipment for testing 6. Export the test data through USB connection U disk

Notice

○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens ○ Prohibition of testing or storage of samples of corrosive substances Prohibition of testing or storage of biological samples Prohibition of testing or storage of samples of strong electromagnetic emission sources ○ No strong vibration around the equipment, the ground is flat and well ventilated No strong electromagnetic field around the equipment, no flammable, explosive, corrosive substances and dust ○ Leave appropriate use and maintenance space around the equipment ○ Require users to configure air or power switches of corresponding capacity at the installation site ○ This plan does not include the installation of ventilated pipes, power supplies, gas sources, water sources and other equipment environment items

Interior Volume
50L
Temperature Range
-60~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
350*400*350mm
Dimension
650 * 1550 * 1200Mm (W * H * D) The actual Size shall prevail
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection.
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] I need a test chamber that can simulate high and low temperature environments, with a temperature range covering -60℃ to 150℃ and a humidity range of 20% to 98%, for testing the reliability of electronic products. Do you have any recommendations?

I recommend a programmable constant temperature and humidity test chamber. It fully meets your requirements for a wide temperature and humidity range, with an internal volume of 50 liters, making it suitable for testing small to medium-sized electronic products. The reasons for this recommendation are its high temperature control precision, minimal temperature fluctuations, accurate humidity control, and support for complex program settings. It can simulate various harsh environmental changes, making it ideal for reliability verification during the research and development phase of electronic products.

CATEGORIES

APKJ AP-HX-50D programmable Humidity Chamber high and low temperature alternating test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a test chamber that can simulate high and low temperature environments, with a temperature range covering -60℃ to 150℃ and a humidity range of 20% to 98%, for testing the reliability of electronic products. Do you have any recommendations?

Tags:

APKJ AP-HX-50D programmable Humidity Chamber high and low temperature alternating test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a test chamber that can simulate high and low temperature environments, with a temperature range covering -60℃ to 150℃ and a humidity range of 20% to 98%, for testing the reliability of electronic products. Do you have any recommendations?

Tags:

Similar products