Please contact customer service
Adopt 7-inch touch screen intelligent controller, support 120 sets of programs and data export. Temperature range -70~ 150 ℃, humidity control 20~ 98% RH, Temperature Uniformity +/- 2.0 ℃. Equipped with multi-wing air supply circulation to ensure uniform insulation field, and has complete fault self-diagnosis and safety protection functions.
Category : Temperature Humidity Chamber
Brand : Apkjgroup
SKU : NB042326
Service :The delivery and service By NBCLab.Com
Programmable humidity chamber (model AP-HX-50F) mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. It is suitable for Electronics Communication, Chemical Industry, Hardware, Rubber, Toys, Scientific Research and other industries. The equipment is mainly composed of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer.
1. Adopt a 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments, and can set cycles, connections and final actions. 2. The controller can be connected to the computer via the LAN interface to realize functions such as remote programming, data collection and recording, and remote control switches. 3. Utilize a multi-wing blower for strong air circulation to avoid any dead ends and ensure uniform indoor temperature and humidity distribution. 4. Equipped with complete safety protection devices, it automatically displays the fault status and cuts off the power supply when abnormal, providing a Troubleshooting method. 5. Adopt original imported high-efficiency Compressors (such as France Taikang, Japan Hitachi) and international brand core components (such as American Henry Oil, Denmark Danfoss Filter, American DuPont environmental refrigerant, etc.) to ensure stable and reliable performance.
The equipment sets the required temperature and humidity program through the control system (microcomputer programmed controller). The refrigeration system (using primary compression or binary cascade refrigeration mode) and the heating system (nickel-chromium heater) work together to regulate the temperature in the box. The humidification system controls the humidity. The air circulation system (driven by a long-axis motor and a wind wheel) forces the air supply to distribute the temperature and humidity evenly in the working room. The real-time feedback data through the Sensor realizes accurate program control.
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
GB/T10589-2008 Low temperature test chamber technical conditions, GB/T10586-2006 Damp heat testing chamber technical conditions, GB/T10592-2008 low/high temperature test chamber technical conditions, GB/T 2423.1 - 2008 Low temperature test Aa, Ab, GB/TT 2423.2 - 2008 Test B: High temperature test method, GB/T 2423.3 - 2006 (IEC68-2-3) Constant humidity cabinet test Ca, MIL-STD810D method 502.2, GB/T 2423.4 - 2008 (MIL-STD810) method 507.2 Program 3, GJB150.9-1986 Military equipment environmental test method - humidity cabinet test, GB 2423.34 - 2012, MIL-STD883C method 1004.2 Temperature and humidity combined cycle test
1. Place the equipment in a flat, well-ventilated site without strong vibration and strong electromagnetic field, and reserve maintenance space. 2. Connect an independent power supply that meets the requirements (AC220V, single-phase two-wire + protective ground wire). 3. Program editing and setting through the controller touch screen or the LAN interface connected to the computer. 4. Place the sample in the box and observe the sample restrictions. 5. Start the device and run the preset temperature and humidity test program. 6. During the test, the data can be monitored by a controller or computer. 7. After the test is completed, remove the sample according to the procedures and turn off the power of the equipment.
Prohibited for flammable, explosive, volatile matter, corrosive substances, biological samples, strong electromagnetic emission source samples test or storage. The installation site needs to be flat, well ventilated, without strong vibration, strong electromagnetic field, flammable and explosive corrosive substances and dust. Appropriate use and maintenance space should be left around the equipment. The power supply needs to be equipped with an independent air or power switch of corresponding capacity, the voltage range is AC (220 +/- 10) V, the frequency is (50 +/- 0.5) Hz, and the grounding resistance of the protective ground wire is less than 4Ω. The working environment temperature of the equipment is recommended to be 5~ 30 ° C, the humidity is ≤ 85%, and the air pressure is 86kPa~ 106kPa. Note that the equipment does not contain ventilated pipes, power cables, leakage switches, gas sources, water sources and other external environment installation items, which need to be prepared separately by the user.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
