Overview
The programmable humidity chamber AP-HX-100B is an Environmental performance equipment produced by APKJ, which mainly provides complex high and low temperature alternating test environments and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production, and inspection. The device adopts a 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 sets of programs, each set of 100 segments, can set loops, connections and final actions, and has USB data recording and export functions.
Features
1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments, can set the program full cycle, partial cycle, program connection and final action
2. You can connect a USB stick to record test data in real time, export historical data, and import pictures.
3. Standard RS232 communication interface, optional RS485, the communication distance is up to 1.2km, and up to 99 units are connected
4. The controller can be connected to the computer via the LAN interface to realize functions such as programming, data collection, and remote control switches
5. Utilize a multi-wing blower for strong air circulation to avoid any dead ends and ensure uniform indoor temperature and humidity distribution
6. Complete safety protection device, automatically displaying fault status when abnormal, cutting off power and providing Troubleshooting method
Principle
The equipment is mainly composed of a control panel, switchboard, thermal insulation compartment, blower, heater, humidifier, and freezer. The temperature and humidity are precisely controlled by a microcomputer program controller. The multi-wing blower is used to power the air supply circulation to ensure uniform distribution of indoor temperature and humidity. The refrigeration system adopts the original imported French Taikang or Japanese Hitachi fully enclosed Compressor, combined with finned tube heat exchanger and expansion valve + capillary tubing throttle device to achieve efficient temperature control.
Applications
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
Standards
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
Steps
1. Ensure that the equipment is installed in a well-ventilated site without strong vibration, flat ground
2. Configure the corresponding capacity air or power switch to provide AC220V power supply
3. Design programs through the controller or import existing programs
4. Set test parameters, including Temperature range, Humidity range, number of cycles, etc
5. Start the equipment and monitor the test process
6. After the test is completed, export the data via USB or connect to a computer to collect records
Notice
○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens
○ Prohibition of testing or storage of samples of corrosive substances
Prohibition of testing or storage of biological samples
Prohibition of testing or storage of samples of strong electromagnetic emission sources
No strong vibration around the equipment
○ No strong electromagnetic field around the equipment
○ No flammable, explosive, corrosive substances and dust around the equipment
○ Leave appropriate use and maintenance space around the equipment
○ power requirements: single-phase two-wire + protective ground wire, voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz, protective ground wire grounding resistance is less than 4Ω
