APKJ AP-HX-100C programmable Humidity Chamber 7 inch touch screen

Name: APKJ AP-HX-100C programmable Humidity Chamber 7 inch touch screen
Brand: Apkjgroup
SKU: NB042329
Price: 4614.0 USD
Availability: InStock

$ 4614.00Ex works

With 120 sets of program control capabilities, each set of 100 segments can be programmed; multi-wing air supply circulation is used to ensure uniform distribution of temperature and humidity; complete safety protection devices are equipped to automatically display fault status; LAN interface is supported to realize computer remote control function.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042329

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-100C programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The device adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs, 100 segments per program, and has USB connection, data export and import and remote communication functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Remote control can be achieved by connecting to the computer through the LAN interface 3. The multi-wing blower has strong air circulation to ensure uniform distribution of temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing troubleshooting methods 5. Using the original imported Compressor (France Taikang or Japan Hitachi), the refrigeration system is efficient and stable 6. The studio is made of SUS304 stainless steel, and the outer box is Cold rolled steel plate advanced baking paint

Principle

The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. Strong air supply circulation is carried out through multi-wing blower to avoid any dead ends and make the indoor temperature and humidity evenly distributed. The refrigeration system adopts original imported Compressor, with finned tube heat exchanger and expansion valve + capillary tubing throttling device to achieve accurate temperature control.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C

Steps

1. Configure the corresponding capacity air or power switch to ensure independent power supply 2. Connect the AC220V power supply to meet the requirements of single-phase two-wire + protective ground wire 3. Set programs and parameters through the controller 4. Start the equipment for testing 5. Export the test data through the USB interface

Notice

○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens ○ Prohibition of testing or storage of samples of corrosive substances Prohibition of testing or storage of biological samples Prohibition of testing or storage of samples of strong electromagnetic emission sources ○ There is no strong vibration around the equipment, the ground is flat and well ventilated No strong electromagnetic field around the equipment, no flammable, explosive corrosive substances and dust ○ Leave appropriate use and maintenance space around the equipment ○ power requirements: voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz, protective ground resistance less than 4Ω

Interior Volume
100L
Temperature Range
-40~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
500*500*400mm
Dimension
780 * 1750 * 1350mm (W * H * D) The actual Size shall prevail.
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] I need a temperature and humidity test chamber to test the reliability of electronic components. The required temperature range is -40°C to 150°C, and the humidity range is 20% to 98% RH, with high accuracy. Do you have any recommendations?

Recommend a programmable temperature and humidity test chamber. It meets your requirements for a wide temperature and humidity range (-40~150°C, 20%~98%RH) and high precision, with temperature fluctuations as low as ±0.5°C and humidity deviation of ±2%RH. This equipment utilizes an imported high-efficiency compressor and an intelligent controller, enabling precise simulation of complex environments. It is well-suited for the research, development, and reliability verification of products such as electronic components.

[Q] Our laboratory wants to simulate the performance of products under alternating environments such as high temperature and high humidity, low temperature and dryness. Which equipment should we choose?

This situation is suitable for using a programmable constant temperature and humidity test chamber. It supports multi-stage program editing and cycling, allowing you to freely set temperature and humidity change curves and durations, perfectly simulating the temperature and humidity alternating environment you mentioned. For example, it can first execute a high-temperature and high-humidity test, then automatically switch to a low-temperature and low-humidity phase. The entire process runs automatically, and data can be recorded and exported. It is a commonly used professional equipment for product environmental adaptability testing.

[Q] When selecting a test chamber, how can you evaluate the quality of the controller and refrigeration system?

Focus on two main points. First, the controller. Choose a smart touchscreen with a large display and user-friendly operation, capable of programming multiple sets of complex test procedures and connecting to a computer or USB drive for data transfer, making it more convenient to use. Second, the refrigeration system. The core is the compressor. It is recommended to select a high-efficiency, fully sealed compressor from a well-known brand, paired with quality throttling and heat exchange components. This ensures fast cooling, stable temperatures, low noise, and greater durability and reliability of the equipment, making long-term operation worry-free.

CATEGORIES

APKJ AP-HX-100C programmable Humidity Chamber 7 inch touch screen

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a temperature and humidity test chamber to test the reliability of electronic components. The required temperature range is -40°C to 150°C, and the humidity range is 20% to 98% RH, with high accuracy. Do you have any recommendations?

[Q] Our laboratory wants to simulate the performance of products under alternating environments such as high temperature and high humidity, low temperature and dryness. Which equipment should we choose?

[Q] When selecting a test chamber, how can you evaluate the quality of the controller and refrigeration system?

Tags:

APKJ AP-HX-100C programmable Humidity Chamber 7 inch touch screen

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a temperature and humidity test chamber to test the reliability of electronic components. The required temperature range is -40°C to 150°C, and the humidity range is 20% to 98% RH, with high accuracy. Do you have any recommendations?

[Q] Our laboratory wants to simulate the performance of products under alternating environments such as high temperature and high humidity, low temperature and dryness. Which equipment should we choose?

[Q] When selecting a test chamber, how can you evaluate the quality of the controller and refrigeration system?

Tags:

Similar products