Please contact customer service
Adopt 7-inch touch screen intelligent controller, support 120 program connection and circulation. Equipped with multi-wing air supply system to ensure uniform temperature and humidity, built-in complete safety protection device. Core paraMeters include Temperature Fluctuation +/- 0.5 ℃, Humidity deviation +/- 2% RH.
Category : Temperature Humidity Chamber
Brand : Apkjgroup
SKU : NB042331
Service :The delivery and service By NBCLab.Com
APKJ AP-HX-100F programmable humidity chamber is a device that provides complex high and low temperature alternating test environments and conditions for electronic parts, industrial materials, finished product research and development, production and inspection. It adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, with powerful program control and data management functions, suitable for Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research and other industries.
Adopt 7-inch super-large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments, can set cycle, connection and end action, and have USB data export/import and RS232 communication functions. 2. The controller can be connected to the computer through the LAN interface to realize remote programming, data collection, recording, and equipment switching control. 3. Utilize a multi-wing blower for strong air circulation to ensure uniform indoor temperature and humidity distribution without dead ends. 4. Equipped with complete safety protection devices, it automatically displays the fault status and cuts off the power supply when abnormal, providing a Troubleshooting method. 5. The core refrigeration components are imported brands, such as France Taikang or Japan Hitachi Compressor, American Henry oil, Denmark Danfoss Filter and expansion valve, etc., to ensure efficient and stable operation. 6. The inner box is made of SUS304 stainless steel, and the outer box is Cold rolled steel plate advanced baking paint, equipped with sweat-proof windows, test holes and movable grid plate racks, the structure is sturdy and durable.
The test chamber precisely adjusts the refrigeration, heating, humidification and air circulation systems through the control system to simulate the required temperature and humidity environment in a confined space. The refrigeration system adopts a primary compression or binary cascade refrigeration mode, and cooperates with a finned tube evaporator and a condenser for heat exchange; the heating system adopts a nickel-chromium heater; the humidification system realizes humidity control; the air circulation system forcibly supplies air through a long-axis motor and a wind turbine to ensure uniform temperature and humidity in the box. The controller instructs the executive parts to work together according to the preset program to achieve the set test conditions.
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
GB/T10589-2008 Low temperature test chamber technical conditions, GB/T10586-2006 Damp heat testing chamber technical conditions, GB/T10592-2008 low/high temperature test chamber technical conditions, GB/T 2423.1 - 2008 Low temperature test Aa, Ab, GB/TT 2423.2 - 2008 Test B: High temperature test method, GB/T 2423.3 - 2006 (IEC68-2-3) Constant humidity cabinet test Ca, MIL-STD810D method 502.2, GB/T 2423.4 - 2008 (MIL-STD810) method 507.2 Program 3, GJB150.9-1986 Military equipment environmental test method - humidity cabinet test, GB 2423.34 - 2012, MIL-STD883C method 1004.2 Temperature and humidity combined cycle test
1. Place the equipment in a flat, well-ventilated, non-strong vibration and strong electromagnetic field, and ensure that there is maintenance space around. Connect an independent power supply that meets the requirements (AC220V +/- 10%, 50 +/- 0.5Hz, and the protective ground resistance is less than 4Ω). 3. Program editing and setting through a 7-inch touch controller or connected computer. 4. Place the sample on the movable grid rack in the box and close the box door to ensure airtightness. 5. Start the equipment, and the controller automatically controls the operation of the refrigeration, heating, humidification and air circulation system according to the preset program. 6. During the test, the data can be monitored by the controller or computer. After the test, the equipment will perform the final operation according to the setting. 7. After the test is completed, remove the sample and turn off the power of the equipment.
It is forbidden to test or store flammable, explosive, volatile matter, corrosive substances, biological samples or strong electromagnetic emission source samples. The installation site needs to be flat, well ventilated, without strong vibration, strong electromagnetic field, flammable, explosive and corrosive substances and dust. It is necessary to configure the independent air or power switch and power supply conditions that meet the requirements (single-phase two-wire + protective ground wire, voltage AC220V +/- 10%, frequency 50 +/- 0.5Hz). The working environment temperature of the equipment is recommended to be 5~ 30 ° C, the humidity is ≤ 85%, and the air pressure is 86kPa~ 106kPa. Pay attention to multiple safety devices such as over-temperature protection and Compressor overcurrent and overheating protection provided by the equipment. If there is any abnormality, please follow the fault prompt to troubleshoot. When moving the device, please use the machine pulley and fix it, and ensure power failure during maintenance.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
