$ 4614.00Ex works
The 7-inch touch controller supports 120 program settings, is equipped with a multi-wing air supply system to ensure a uniform temperature and humidity of +/- 2 ° C, and has a LAN interface to realize computer remote control and data recording functions.
Category : Temperature Humidity Chamber
Brand : Apkjgroup
SKU : NB042333
Service :The delivery and service By NBCLab.Com
APKJ AP-HX-150B programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment adopts 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs, each program has 100 segments, and has program circulation, connection and data recording functions.
1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Remote control can be achieved by connecting to the computer via the LAN interface 3. The multi-wing blower has strong air circulation to ensure uniform distribution of temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing troubleshooting methods 5. Using original imported Compressors, including French Taikang and Japanese Hitachi brands 6. Studio volume 150L, Temperature range -20 ℃~ + 150 ℃, Moisture control range 20~ 98% R.H
The equipment is mainly composed of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. Through the strong air supply circulation of multi-wing blower, any dead angle is avoided, and the indoor temperature and humidity are evenly distributed. The refrigeration system adopts the original imported Compressor, and cooperates with evaporator, condenser and other components to realize temperature control.
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
1. Ensure that there is no strong vibration in the installation site, and the ground is flat and ventilated 2. Configure the corresponding capacity air or power switch to provide AC220V power supply 3. Connect the controller to the computer for programming 4. Set test parameters and cycle conditions 5. Start the device for testing 6. Monitor the test process and data logging through the controller
○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens ○ Prohibition of testing or storage of samples of corrosive substances Prohibition of testing or storage of biological samples Prohibition of testing or storage of samples of strong electromagnetic emission sources No strong vibration and strong electromagnetic field around the equipment ○ No flammable, explosive, corrosive substances and dust around the equipment ○ The grounding resistance of the protective ground wire should be less than 4Ω. ○ Working environment temperature 5~ 30 ℃, humidity ≤ 85%
This situation is suitable for using a programmable constant temperature and humidity test chamber. It can simulate complex environmental changes through programming, such as day-night temperature differences, seasonal transitions, or regional temperature and humidity conditions. The device you mentioned supports 120 programs, with 100 segments each, allowing for flexible cycle and connection settings. This makes it ideal for simulating the actual environments that products experience during storage, transportation, and other stages, thereby identifying potential quality issues in advance.
Important, especially for scenarios requiring complex testing procedures. A good controller serves as the 'brain' of the test chamber. It is recommended to choose an intelligent controller with a large touchscreen and intuitive operation. It should support the editing of complex programs with multiple groups and segments and facilitate easy connection to a computer for remote control and data export. This allows for more flexible setup of testing steps and more efficient management of historical data, significantly enhancing the efficiency of research, development, and quality inspection work.
