APKJ AP-HX-150C programmable Humidity Chamber high and low temperature alternating environment test

Name: APKJ AP-HX-150C programmable Humidity Chamber high and low temperature alternating environment test
Brand: Apkjgroup
SKU: NB042334
Price: 4726.0 USD
Availability: InStock

$ 4726.00Ex works

Equipped with 7-inch touch controller to support 120 program settings, multi-wing air supply circulation to ensure uniform distribution of temperature and humidity, studio volume 150L and Temperature Fluctuation +/- 0.5 ℃, with USB data export and LAN remote control function.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042334

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-150C programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The device adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs, 100 segments per program, and has USB connection, data recording export and communication functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Can be connected to a computer through a LAN interface for remote control, programming, and data collection 3. The multi-wing blower has strong air circulation to ensure uniform distribution of indoor temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing Troubleshooting methods 5. Using the original imported Compressor (France Taikang or Japan Hitachi), the refrigeration system is efficient and stable 6. Studio volume 150L, Temperature range -40~ 150 ℃, Moisture control range 20~ 98% R.H

Principle

The programmable humidity chamber is mainly composed of a control panel, switchboard, thermal insulation compartment, blower, heater, humidifier, and freezer. The multi-wing blower is used to strongly circulate the air to avoid any dead ends and distribute the indoor temperature and humidity evenly. The refrigeration system adopts the original imported Compressor, which realizes temperature control through expansion valve and capillary tubing throttling and pressure reduction, and cooperates with finned tube heat exchanger.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C

Steps

1. Configure the corresponding capacity air or power switch to ensure independent power supply AC220V 2. Connect the LAN interface to the computer, design programs, and collect test data 3. Set up program loops, connections, and terminations 4. Start the equipment for testing 5. Export the test history data through USB connection U disk

Notice

Prohibition of testing or storage of flammable, explosive or volatile matter specimens • Prohibition of testing or storage of samples of corrosive substances • Prohibition of testing or storage of biological samples • Prohibition of testing or storage of samples of strong electromagnetic emission sources • No strong vibration around the equipment, the ground is flat and well ventilated • No strong electromagnetic field around the equipment, no flammable, explosive corrosive substances and dust • Leave appropriate use and maintenance space around the equipment • Power supply requirements: single-phase two-wire + protective ground wire, voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz • Protective ground wire grounding resistance is less than 4Ω

Interior Volume
150L
Temperature Range
-40~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
500*600*500mm
Dimension
780 * 1850 * 1450Mm (W * H * D) The actual Size shall prevail.
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection.
Control mode
The control system automatically adjusts the operation of the refrigerator according to the test conditions, so that the equipment is in the best energy-saving working condition. The cooling capacity of the evaporator is switched by the solenoid valve driven by the control system. The compressor return air is cooled down.
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] I need a temperature and humidity test chamber with a test range of -40 to 150°C, humidity from 20% to 98% RH, and an internal volume of around 150 liters. Do you have any recommendations?

Recommend a programmable constant temperature and humidity test chamber. It features an imported compressor, high temperature control accuracy, temperature uniformity of ±2°C, humidity deviation of ±2%RH, meeting your testing requirements. With an inner chamber volume of 150L and appropriate dimensions, it supports multiple program settings, making it convenient for complex high and low temperature alternating tests.

[Q] We are engaged in electronic component R&D and need to simulate product performance under high-temperature and high-humidity environments. Which equipment should we use?

For high-temperature and high-humidity testing of electronic components, it is recommended to use a programmable constant temperature and humidity test chamber. It can precisely control temperature and humidity, simulate various harsh environments, such as constant humidity and heat or temperature and humidity cycles, helping you verify product reliability and durability. Additionally, it is easy to operate, and data recording and export are very convenient.

[Q] How to choose the refrigeration system and controller when selecting a test chamber?

It is recommended to select a highly efficient, fully enclosed compressor for the refrigeration system, such as an imported brand, to ensure fast cooling, stable operation, and low noise. For the controller, it is best to choose an intelligent program controller with a large touchscreen, capable of setting multiple programs with long durations for each period, and supporting remote control via computer connection. This will make it much easier for you to conduct complex experiments or manage data.

CATEGORIES

APKJ AP-HX-150C programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a temperature and humidity test chamber with a test range of -40 to 150°C, humidity from 20% to 98% RH, and an internal volume of around 150 liters. Do you have any recommendations?

[Q] We are engaged in electronic component R&D and need to simulate product performance under high-temperature and high-humidity environments. Which equipment should we use?

[Q] How to choose the refrigeration system and controller when selecting a test chamber?

Tags:

APKJ AP-HX-150C programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I need a temperature and humidity test chamber with a test range of -40 to 150°C, humidity from 20% to 98% RH, and an internal volume of around 150 liters. Do you have any recommendations?

[Q] We are engaged in electronic component R&D and need to simulate product performance under high-temperature and high-humidity environments. Which equipment should we use?

[Q] How to choose the refrigeration system and controller when selecting a test chamber?

Tags:

Similar products