$ 5507.00Ex works
Adopt 7-inch touch controller to support 120 program settings, equipped with multi-wing air supply system to ensure uniform distribution of temperature and humidity, Temperature Fluctuation +/- 0.5 ℃, humidity deviation +/- 2% R.H to ensure test accuracy.
Category : Temperature Humidity Chamber
Brand : Apkjgroup
SKU : NB042338
Service :The delivery and service By NBCLab.Com
APKJ AP-HX-225B programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment studio volume is 225L, Temperature range -20 ℃~ + 150 ℃, humidity control range 20~ 98% R.H., using original imported Compressor and intelligent programmable temperature and humidity controller.
1.7-Inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 sets of programs, 100 segments per set of programs 2. Can be connected to the computer via the LAN interface to realize remote control function 3. The multi-wing blower has strong air circulation to avoid any dead ends and ensure uniform indoor temperature and humidity distribution 4. Complete safety protection device, automatically displaying fault status and providing Troubleshooting method in case of abnormal conditions 5. Using the original imported French Taikang or Japanese Hitachi fully enclosed Compressor, the refrigeration system is stable and reliable 6. The studio is made of SUS304 stainless steel, and the outer box is Cold rolled steel plate advanced baking paint
The programmable humidity chamber is mainly composed of a control panel, switchboard, thermal insulation compartment, blower, heater, humidifier, and freezer. The temperature and humidity are precisely controlled by a microcomputer program controller, and the multi-wing blower is used to power the air supply circulation to make the indoor temperature and humidity evenly distributed. The refrigeration system adopts the original imported Compressor, the 0 ℃~ -40 ℃ model adopts primary compression, and the -40 ℃~ -70 ℃ adopts binary cascade refrigeration.
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
1. Confirm that the installation site meets the requirements: no strong vibration, flat ground, well ventilated 2. Check the power supply conditions: configure the corresponding capacity air or power switch, AC220V power supply 3. Connect to the computer (optional): Connect to the computer through the LAN interface 4. Set up the test program: Design the program on the controller or computer 5. Place the sample: place the sample on the tray rack in the box 6. Start the test: Run the preset program to test 7. Monitoring data: Monitor test data in real time through a controller or computer 8. Export data: Export test historical data through USB connection U disk
Prohibition of testing or storage of flammable, explosive or volatile matter specimens • Prohibition of testing or storage of samples of corrosive substances • Prohibition of testing or storage of biological samples • Prohibition of testing or storage of samples of strong electromagnetic emission sources • No strong vibration around the equipment • No strong electromagnetic field around the device • No flammable, explosive, corrosive substances and dust around the equipment • Requires independent power supply AC220V power supply, voltage range AC (220 +/- 10) V • Protective ground wire grounding resistance is less than 4Ω • Working environment temperature 5~ 30 ℃, humidity ≤ 85%
Recommend a programmable temperature and humidity test chamber with an inner chamber volume of 225 liters. It can precisely control temperature and humidity, with temperature uniformity within ±2°C and humidity deviation within ±2% RH, meeting your requirements for high and low temperature, humidity, and thermal cycling tests on electronic components. This device offers flexible program control, enabling the simulation of complex environmental changes, making it suitable for use in research and development as well as quality control processes.
For the testing of chemical materials, the core lies in ensuring the stability and uniformity of temperature and humidity control. It is recommended to focus on the temperature fluctuation of the equipment (preferably within ±0.5°C) and humidity uniformity (e.g., within ±3% RH), as this ensures reliable data. Additionally, the equipment's inner chamber should be made of corrosion-resistant stainless steel and equipped with comprehensive safety protection functions to prevent accidents. The type of test chamber you mentioned is highly suitable, as it can strictly follow standard procedures to ensure consistency in testing conditions.
