Overview
APKJ AP-HX-408B programmable humidity chamber is a kind of equipment used to provide complex high and low temperature alternating test environment. The equipment mainly provides test conditions for electronic parts, industrial materials, finished product research and development, production and inspection. It is suitable for Electronics Communication, Chemical, Hardware, Rubber, Toy, Scientific Research and other industries.
Features
1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments, can set program cycle, connection and final action
2. The controller can be connected to the computer through the LAN interface for remote control, programming, and data collection
3. The multi-wing blower has strong air circulation to ensure uniform indoor temperature and humidity distribution without dead ends
4. Complete safety protection device, automatically displaying fault status and cutting off power when abnormal, providing Troubleshooting method
5. Using imported Compressors and high-quality parts to ensure stable and reliable operation of the equipment
Principle
The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. The temperature and humidity are precisely controlled by a microcomputer programmatic controller, and the multi-wing blower is used for strong air circulation to ensure uniform distribution of temperature and humidity in the test chamber. The refrigeration system adopts the original imported Compressor, and the throttle and pressure reduction are carried out through the expansion valve and capillary tubing to achieve accurate temperature control.
Applications
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
Standards
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
Steps
1. Ensure that the equipment is installed in a well-ventilated site without strong vibration, flat ground
2. Configure the corresponding capacity air or power switch to provide AC220V power supply
3. Set the test program and parameters through the controller
4. Start the equipment for testing
5. After the test is completed, export the data and turn off the device
Notice
Prohibit the testing or storage of flammable, explosive or volatile matter
Prohibition of testing or storage of corrosive substances
• Prohibition of testing or storage of biological samples
Prohibition of testing or storage of samples of strong electromagnetic emission sources
• There should be no strong vibration and strong electromagnetic field around the equipment
Equipment should be free from flammable, explosive, corrosive substances and dust
• Ensure that the supply voltage is within the AC (220 +/- 10) V range
• The grounding resistance of the protective ground wire should be less than 4Ω.
The working environment temperature should be kept at 5~ 30 ℃
• Working environment humidity should be ≤ 85%
