Overview
APKJ AP-HX-408D programmable humidity chamber is a professional Environmental performance equipment, which mainly provides complex high and low temperature alternating test environment and conditions for electronic parts, industrial materials, finished product development, production and inspection. The equipment adopts advanced control system and high-quality parts to ensure test accuracy and Reliability.
Features
1. Equipped with 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 sets of programs, each set of 100 segments
2. Remote control can be achieved by connecting to the computer through the LAN interface
3. Adopt a multi-wing blower with strong air circulation to ensure uniform distribution of temperature and humidity
4. Equipped with complete safety protection devices, it automatically displays the status and provides troubleshooting methods in case of failure
5. Using original imported Compressors, including French Taikang and Japanese Hitachi brands
6. Studio volume 408L, Temperature range -60~ 150 ℃, humidity control range 20~ 98% R.H
Principle
The equipment works together through the control panel, switchboard, thermal insulation compartment, blower, heater, humidifier, freezer and other components. The refrigeration system adopts the original imported Compressor, and the temperature control is realized through the expansion valve + capillary tubing throttle device; the heating system uses nickel-chromium heater; the air circulation system drives the air flow through the long-axis motor and wind wheel to ensure the uniform distribution of temperature and humidity in the test chamber.
Applications
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
Standards
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
Steps
1. Confirm that the installation site meets the requirements: no strong vibration, flat ground, well ventilated
2. Check the power supply conditions: configure the corresponding capacity air or power switch, voltage AC220V +/- 10%
3. Connect the power supply of the device to ensure that the grounding resistance of the protective ground wire is less than 4Ω.
4. Set test programs and parameters through the controller
5. Start the device to run the test program
6. Monitor the testing process to ensure the normal operation of the equipment
Notice
Prohibit the testing or storage of flammable, explosive or volatile matter
Prohibition of testing or storage of corrosive substances
• Prohibition of testing or storage of biological samples
Prohibition of testing or storage of samples of strong electromagnetic emission sources
• There should be no strong vibration and strong electromagnetic field around the equipment
Equipment should be free from flammable, explosive, corrosive substances and dust
• Appropriate use and maintenance space should be left around the equipment
• The installation site needs to be equipped with an independent power supply switch
The working environment temperature should be kept at 5~ 30 ℃
• Working environment humidity should be ≤ 85%
