Overview
APKJ AP-HX-800B programmable humidity chamber is a device that provides complex high and low temperature alternating test environments and conditions for electronic parts, industrial materials, finished product research and development, production, and inspection. It adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs and 100 segments of programming per group, and has USB data recording and RS232 communication functions. It is suitable for Electronics Communication, Chemical, Hardware, Rubber, Toy, Scientific Research and other industries.
Features
1. Adopt a 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs and 100 segments of each program, and can set program loops, connections, and end actions.
2. With USB connection function, it can record and export test data in real time, and import pictures.
3. Standard RS232 communication interface, optional RS485, supports remote control and multi-machine connection.
4. Utilize a multi-wing blower for strong air circulation to ensure uniform distribution of temperature and humidity.
5. Built-in complete safety protection device, automatically displays the fault status and provides troubleshooting methods.
6. Adopt imported Compressor and high efficiency refrigeration system to ensure Stability and low energy consumption.
7. The studio is made of SUS304 stainless steel, and the outer box is Cold rolled steel plate high-grade baking paint, with good thermal insulation performance.
Principle
The test chamber realizes temperature and humidity control through a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. The multi-wing blower is used for strong air circulation to avoid dead ends and ensure uniform distribution of indoor temperature and humidity. The refrigeration system adopts original imported Compressors (such as France Taikang or Japan Hitachi), with evaporators, condensers and throttling devices to achieve efficient cooling and temperature regulation. The heating system uses nickel-chromium heaters, and the control system precisely manages the temperature and humidity and the cycle process through a microcomputer program controller.
Applications
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
Standards
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
Steps
1. Ensure that the installation site is free from strong vibration, the ground is flat, well ventilated, and there is no strong electromagnetic field and flammable and explosive substances.
2. Configure an independent AC220V power supply to meet the requirements of single-phase two-wire + protective ground wire, voltage range AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz.
3. Connect the power supply and necessary external environment items (such as ventilated pipes, water sources, etc.).
4. Use the controller to set programs and parameters, and connect to the computer via the LAN interface for remote control.
5. Start the equipment, monitor the test process, and ensure the normal operation of the safety protection device.
6. After the test, export the data and turn off the device.
Notice
• It is forbidden to test or store flammable, explosive, volatile matter, corrosive substances, biological samples or samples of strong electromagnetic emission sources.
• The installation site needs no strong vibration, the ground is flat, well ventilated, and there is no strong electromagnetic field.
• Appropriate use and maintenance space should be left around the equipment.
• Independent configuration of power requirements, protective ground wire grounding resistance is less than 4Ω.
The working environment temperature should be between 5~ 30 ℃, humidity ≤ 85%, pressure 86kPa~ 106kPa.
• Regularly check safety protection devices, such as Compressor high voltage protection and over-temperature protector, to ensure normal operation.
