APKJ AP-HX-800C programmable Humidity Chamber high and low temperature alternating environment test

Name: APKJ AP-HX-800C programmable Humidity Chamber high and low temperature alternating environment test
Brand: Apkjgroup
SKU: NB042350
Price: 8104.0 USD
Availability: InStock

$ 8104.00Ex works

With 120 sets of program control ability, Temperature Uniformity +/- 2.0 ℃, support LAN remote monitoring, use multi-wing air supply circulation to ensure uniform insulation field, equipped with complete safety protection devices.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042350

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-800C programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment adopts 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 sets of programs, each set of 100 segments, and has program circulation, connection and data recording functions.

Features

1. Adopt a multi-wing blower for strong air circulation to avoid any dead ends and ensure uniform indoor temperature and humidity distribution 2. Complete safety protection device, automatically displays the fault status and cuts off the power supply in case of abnormal conditions 3. The controller can be connected to the computer through the LAN interface to realize the remote control function 4. Adopt original imported Compressors, including French Taikang and Japanese Hitachi brands, to ensure efficient refrigeration 5. Equipped with DuPont environmental refrigerant R-404/R23, with good safety and thermophysical performance 6. The studio is made of SUS304 stainless steel, and the outer box is Cold rolled steel plate advanced baking paint

Principle

The equipment is mainly composed of control panel, switchboard, insulation compartment, blower, heater, humidifier and freezer. The temperature and humidity are precisely controlled by microcomputer program controller, and the wide temperature range of -40~ 150 ℃ is controlled by refrigeration system and heating system, and the air circulation system ensures the uniform distribution of temperature and humidity in the test chamber.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C

Steps

1. Confirm that the installation site meets the requirements: no strong vibration, flat ground, well ventilated 2. Check the power supply conditions: configure the corresponding capacity air or power switch, AC220V power supply 3. Connect the necessary external environment items: ventilated pipes, power cables, gas sources, water sources, etc 4. Set the test program and parameters through the controller 5. Start the equipment for testing 6. Export test data via USB interface

Notice

Prohibition of testing or storage of flammable, explosive or volatile matter specimens • Prohibition of testing or storage of samples of corrosive substances • Prohibition of testing or storage of biological samples • Prohibition of testing or storage of samples of strong electromagnetic emission sources • There should be no strong vibration and strong electromagnetic field around the equipment Equipment should be free from flammable, explosive, corrosive substances and dust • Appropriate use and maintenance space should be left around the equipment • Power supply requirements: single-phase two-wire + protective ground wire, voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz • The grounding resistance of the protective ground wire should be less than 4Ω.

Interior Volume
800L
Temperature Range
-40~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
1000*1000*800mm
Dimension
1280 * 2250 * 1700mm (W * H * D) The actual Size shall prevail
weight
About 600kg
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage circuit breaker Leakage protection FUSE. RC electronic surge protection.
Control mode
The control system automatically adjusts the operation of the refrigerator according to the test conditions, so that the equipment is in the best energy-saving working condition. The cooling capacity of the evaporator is switched by the solenoid valve driven by the control system. The compressor return air is cooled down.
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] We have a wide range of constant temperature and humidity test chambers suitable for testing the high and low temperature resistance of electronic products. Could you please provide the specific testing requirements, such as temperature range, humidity range, and internal dimensions?

Yes, I recommend the AP-HX-800C Programmable Constant Temperature and Humidity Test Chamber. It features a temperature range from -40°C to 150°C and a humidity range of 20% to 98% RH, making it suitable for simulating the working conditions of electronic products in various extreme temperature and humidity environments, thereby testing their reliability and durability. Its 7-inch large touch screen controller is easy to operate, allowing for programming to simulate complex temperature cycles, which can meet your testing needs.

[Q] Is the AP-HX-800C suitable for temperature and humidity cycle testing of chemical materials in our laboratory?

Appropriate. The AP-HX-800C is widely used for the research, development, and inspection of materials in industries such as chemical and rubber. It employs a multi-winged forced air circulation system to ensure uniform temperature and humidity inside the chamber, guaranteeing accurate and reliable test results. The equipment complies with multiple national standards, such as the GB/T2423.4 combined temperature and humidity cyclic test, which effectively simulates the complex environmental changes materials experience during actual storage or use, helping you evaluate the performance stability of materials.

CATEGORIES

APKJ AP-HX-800C programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] We have a wide range of constant temperature and humidity test chambers suitable for testing the high and low temperature resistance of electronic products. Could you please provide the specific testing requirements, such as temperature range, humidity range, and internal dimensions?

[Q] Is the AP-HX-800C suitable for temperature and humidity cycle testing of chemical materials in our laboratory?

Tags:

APKJ AP-HX-800C programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] We have a wide range of constant temperature and humidity test chambers suitable for testing the high and low temperature resistance of electronic products. Could you please provide the specific testing requirements, such as temperature range, humidity range, and internal dimensions?

[Q] Is the AP-HX-800C suitable for temperature and humidity cycle testing of chemical materials in our laboratory?

Tags:

Similar products