Overview
The programmable humidity chamber AP-HX-1000C is a professional Environmental performance equipment produced by APKJ, which mainly provides complex high and low temperature alternating test environments and conditions for electronic parts, industrial materials, finished product research and development, production, and inspection. The equipment adopts a 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, which supports 120 sets of programs, each set of 100 segments, with program circulation, connection and data recording functions.
Features
1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments
2. Remote control can be achieved by connecting to the computer via the LAN interface
3. The multi-wing blower has strong air circulation to avoid any dead ends and ensure uniform distribution of temperature and humidity
4. Complete safety protection device, automatically displaying fault status and cutting off power when abnormal
5. Original imported Compressor sets, including French Taikang and Japanese Hitachi brands, ensure efficient refrigeration
6. Adopt environmentally friendly refrigerant R-404/R23, meeting environmental requirements
7. The studio material is SUS304 stainless steel, and the outer box is Cold rolled steel plate advanced baking paint, durable and beautiful
Principle
The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier, and freezer. The temperature and humidity are precisely controlled by a microcomputer programmatic controller. The multi-wing blower is used for strong air supply circulation to ensure uniform distribution of indoor temperature and humidity. The refrigeration system adopts the original imported Compressor, and the throttling and pressure reduction are carried out through the expansion valve and capillary tubing to achieve rapid cooling and temperature stability.
Applications
Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research
Standards
GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C
Steps
1. Ensure that the installation site has no strong vibration, the ground is flat and well ventilated
2. Configure the corresponding capacity air or power switch to provide AC220V power supply
3. Connect the LAN interface to the computer for programming and control
4. Set program groups and segments, adjust temperature and humidity parameters
5. Start the device and monitor the testing process
6. After the test is complete, export the data and turn off the device
Notice
○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens
○ Prohibition of testing or storage of samples of corrosive substances
Prohibition of testing or storage of biological samples
Prohibition of testing or storage of samples of strong electromagnetic emission sources
No strong vibration and strong electromagnetic field around the equipment
○ No flammable, explosive, corrosive substances and dust around the equipment
○ Ensure that the power supply conditions meet the requirements: single-phase two-wire + protective ground wire, voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz
○ Protective ground wire grounding resistance is less than 4Ω
○ Working environment temperature 5~ 30 ℃, humidity ≤ 85%, air pressure 86kPa~ 106kPa
