Please contact customer service
Adopting a two-box mobile design, the pneumatic drive basket can be quickly converted, with a temperature recovery time of less than 5 minutes and a conversion time of less than 10 seconds, meeting a number of military and industrial test standards.
Category : Thermal Shock Test Chamber
Brand : Apkjgroup
SKU : NB042383
Service :The delivery and service By NBCLab.Com
APKJ 2AP-CJ-100B Thermal Shock Test Chamber is a device used to test the tolerance of materials in extremely high temperature and extremely low temperature instantaneous change environment. It adopts a two-box mobile design, and the test product is quickly moved between the high temperature and low temperature regions by air pressure drive basket to simulate harsh temperature Impact conditions. It is widely used in Electronics, Auto Parts, Metal Chemical Materials, Defense Aerospace and other industries.
1. Adopt two-box mobile design, high temperature zone and low temperature zone are separated, and the test product is dynamic Impact. 2. Equipped with self-developed 7-inch super touch AP-950 programmable temperature controller, easy to operate, you can set the temperature point arbitrarily. 3. Adopt the original imported color touch LCD Chinese/English microcomputer temperature controller, with paperless recording and real-time temperature Linear dispersion display function. 4. Impact conversion time is fast, the movement time of the hanging basket is within 10 seconds, and the temperature recovery time is within 5 minutes, in line with a number of international standards. 5. Adopt HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system for rapid cooling and high efficiency. 6. The box is made of rigid polyurethane foam insulation material, which has the advantages of energy saving, shock resistance and compression resistance, low ultra-low temperature thermal conductivity, waterproof insulation, etc. 7. Safety protection devices, including Compressor protection, over-temperature protection, power protection, etc. 8. The controller has auxiliary functions such as program memory, reservation startup, and screen locking.
The equipment is divided into two parts: high greenhouse and low greenhouse. The test product is placed in the basket, and the test product carried in the basket is quickly moved up and down between the high temperature zone and the low temperature zone through a safe air pressure drive system to realize Thermal Shock. The Control system precisely controls the temperature and exposure time of each zone according to the set program to test the chemical or physical changes caused by the sudden change of temperature of the material.
Electronics components, plastics, automation parts, communication components, auto parts, metals, chemical materials, plastics, defense industry, aerospace, military industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic, polymer materials
GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.22-2012、GJB150.5-86、GJB360.7-87、GJB367.2-87、QC/T17-92、EIA364-32、IEC68-2-14
1. Place the test product in the hanging basket test area. 2. Set the required high and low temperature Impact temperature point, exposure time and other program parameters through the Touchscreen controller. 3. Start the equipment, and the pneumatic drive system moves the basket (including the test product) into the high temperature or low temperature zone for impact testing. 4. The equipment runs automatically according to the set program, and the temperature Linear dispersion can be observed in real time on the controller. 5. After the test is completed, the device can automatically stop or execute the next program.
The equipment needs to be equipped by the user at the installation site with a corresponding capacity air or power switch for independent use by the equipment. The power requirements are AC380V three-phase four-wire + protective ground wire, the voltage range is AC (380 +/- 10) V, Frequency (50 +/- 0.5) Hz, and the grounding resistance of the protective wire should be less than 4Ω. This plan does not include the installation of ventilated pipelines, power supplies (leakage switches), gas sources (air Compressors), water sources and other equipment environment items, which require users to prepare separately. Ambient Temperature should be maintained between + 25~ + 30 ℃, relative humidity ≤ 85%, pressure 86kPa~ 106kPa. When the equipment is not working, the Ambient Temperature should be kept at 0 ° C to + 45 ° C; when the Ambient Temperature is lower than 0 ° C, the water left in the equipment must be drained clean to prevent the pipeline from freezing and damage. The pressure of the air source should be maintained at (5~ 7) kg/cm ², and the diameter of the connecting pipe should be 8 mm. When operating, please pay attention to the identification and status of various safety protection devices on the equipment. The standard load-bearing capacity of the sample shelf is 25KG. If you need a larger load-bearing capacity, you need to indicate it when placing an order.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
