Please contact customer service
Two-box mobile structure is adopted, the high temperature zone and the low temperature zone are independent, and the test object is dynamically impacted by the basket. Temperature recovery time ≤ 5 minutes, conversion time ≤ 10 seconds, in line with MIL, IEC and other specifications. Equipped with ultra-low temperature freezing system, the cooling is fast and efficient.
Category : Thermal Shock Test Chamber
Brand : Apkjgroup
SKU : NB042384
Service :The delivery and service By NBCLab.Com
APKJ 2AP-CJ-100C Thermal Shock Test Chamber is a device used to test the tolerance of materials in extremely high temperature and extremely low temperature instantaneous change environments. It adopts a two-box mobile design, and the test product is quickly converted between the high temperature and low temperature regions by air pressure drive basket to simulate severe temperature Impact conditions. It is widely used in Electronics, Automotive, Metal, Chemical, Plastic and Defense Aerospace industries.
1. Adopting a two-box mobile design, the high temperature zone is separated from the low temperature zone, and the test product is driven by air pressure for dynamic Impact. 2. Equipped with Aipei's self-developed 7-inch super-large touch AP-950 programmable temperature controller, it supports Touchscreen input and Linear dispersion display. 3. Impact conversion time is fast (≤ 10 seconds), temperature recovery time is short (≤ 5 minutes), in line with a number of international standards. 4. Adopt HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system for rapid and efficient cooling. 5. The box is made of rigid polyurethane foam insulation material, which has the advantages of energy saving, compression resistance, heat insulation and waterproof. 6. Safety protection device with perfect, including Compressor, laboratory overtemperature, power supply phase sequence lack equal multiple protection. 7. The controller has ancillary functions such as paperless recording, program memory, and appointment startup.
The equipment is divided into two independent areas of high greenhouse and low greenhouse. The test product is placed in the basket, and the basket is quickly moved into the high temperature or low temperature area within a set time (such as within 10 seconds) through a safe air pressure drive system to achieve Thermal Shock of the test product. The Control system precisely controls the temperature and exposure time of each area according to the preset program to test the chemical or physical changes caused by the sudden change of temperature of the material.
Electronics components, plastics, automation parts, communication components, auto parts, metals, chemical materials, plastics, defense industry, aerospace, military industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic, polymer materials
GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.22-2012、GJB150.5-86、GJB360.7-87、GJB367.2-87、QC/T17-92、EIA364-32、IEC68-2-14
1. Place the test product in the hanging basket test area. 2. Set the required high and low temperature Impact temperature point, exposure time and other program parameters through the Touchscreen controller. 3. Start the equipment, and the air pressure drive system will automatically move the basket (together with the test product) up and down between the high and low greenhouses according to the program, and carry out the temperature impact test. 4. Linear dispersion can be observed in real time through the controller during the test. 5. After the test is completed, the equipment can be automatically shut down or follow-up operations can be performed according to the setting.
The equipment requires the user to configure the corresponding capacity air or power switch for independent use on site. The power requirements are AC380V three-phase four-wire plus protective ground, the allowable voltage range (380 +/- 10) V, Frequency (50 +/- 0.5) Hz, and the grounding resistance of the protective ground must be less than 4Ω. When installing, ensure that the Ambient Temperature around the equipment is between + 25~ + 30 ℃, the relative humidity is ≤ 85%, and the normal atmospheric pressure (86kPa~ 106kPa) is provided. This plan does not include the installation of ventilated pipes, power supplies (leakage switches), gas sources (air Compressors), water sources and other equipment environment items, and users need to prepare separately. When the equipment is not working, the Ambient Temperature should be kept at 0 ℃~ + 45 ℃; if the Ambient Temperature is lower than 0 ℃, the water in the equipment must be emptied to prevent the pipeline from freezing and cracking. The pressure of the air source should be maintained at (5~ 7) kg/cm ², and the diameter of the connecting pipe should be 8 mm. Note that the maximum power of the device is about 12.0KW, and the maximum current is about 18A.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
