Overview
HBO HTS-100 intelligent electric spring testing machine is mainly suitable for testing the displacement, deformation, tensile pressure and spring coefficient of tension and compression springs, and can also conduct related tests on parts and components. This machine refers to the "JB-T7796-2005" spring testing machine standard and material test method. It can conduct tests and provide data according to national standards and ISO, JIS, ASTM, DIN and other international standards. It is a professional testing equipment for industrial and mining enterprises, technical supervision, commodity inspection and arbitration, scientific research institutes, Universities & colleges, Quality control units and other departments.
Features
1. High Accuracy, High Resolution, High Stability.
2. Equipped with a large 7-inch touch LCD screen, the human-machine interaction interface is simple and easy to use.
3. Provide four test modes: fixed height force value, fixed deformation force value, fixed force value to measure height, and fixed force value to measure deformation.
4. The test direction is clearly displayed, [stress testing]: press "+", pull "-", [tension test]: pull "+", press "-".
5. Support six force units N, kgf, lbf, gf, tf and KN interchangeability.
6. Support three displacement units mm, cm and in interchange.
7. Up to 10 test points can be customized, and the corresponding qualification interval judgment can be set.
8. Test data are presented in Linear dispersion and tabular form.
9. The test interface can display real-time force value, real-time displacement, spring height (height test), deformation value (deformation test), test time, test point stiffness and average stiffness.
10. The device comes with its own memory function and overload protection function.
11. After the test is completed, the data bar is automatically saved, and the system can save 10,000 test data.
12. Built-in micro-printer, allowing for direct printing of test data.
Principle
The testing machine uses a stepper motor loading method to measure the force and displacement changes generated by the spring when it is compressed or stretched at a set speed (0-500mm/min can be set) through the High Accuracy Sensor. The system collects and processes data in real time according to the set test mode (such as the fixed height force measurement value, etc.), calculates the stiffness of the spring and other parameters, and displays, stores or prints the results through the Touchscreen.
Applications
Industrial and mining enterprises, technical supervision, commodity inspection and arbitration, research institutes, Universities & colleges, Quality control units
Standards
JB-T7796-2005、ISO、JIS、ASTM、DIN
Steps
1. Connect the AC 220V 50HZ power supply and turn it on.
2. Set the test mode on the 7-inch Touchscreen (four modes are optional).
3. Set the force value unit (six optional) and the displacement unit (three optional).
4. Customize test points (up to 10 groups) and qualification intervals as needed.
Test speed (0-500mm/min).
6. Install the spring or component to be tested.
7. Start the test, the equipment automatically runs and displays the force value, displacement, stiffness and other data in real time. Linear dispersion.
8. After the test is completed, the data is automatically saved and the results can be printed using the built-in microprinter.
Notice
Please make sure to use AC 220V 50HZ power supply.
* Equipment effective Travel ≥ 260mm, please be careful not to exceed the Travel range during testing.
The equipment has an overload protection function, but it is still necessary to take care not to exceed 100N range.
Please set the test direction (pressure/tension) and unit correctly before testing.
* The maximum number of data bars saved is 10,000, please pay attention to regular data management.
Please follow the relevant safety regulations when operating.
