Overview
HBO HTS-5000 intelligent electric spring testing machine is mainly suitable for testing the displacement, deformation, tensile pressure and spring coefficient of tension and compression springs, and can also conduct related tests on parts and components. This machine refers to the "JB-T7796-2005" spring testing machine standard and material test method, can test and provide data according to national standards and ISO, JIS, ASTM, DIN and other international standards. It is a professional testing equipment for industrial and mining enterprises, technical supervision, commodity inspection and arbitration, scientific research institutes, Universities & colleges, Quality control units and other departments.
Features
1. High Accuracy, High Resolution, High Stability.
2. Large 7-inch touch LCD screen, human-machine interaction interface is simple and easy to use.
3. Provide four test modes: fixed height force value, fixed deformation force value, fixed force value to measure height, and fixed force value to measure deformation.
4. The test direction shows [stress testing]: press "+", pull "-", [tension test]: pull "+", press "-".
5. The six force units N, kgf, lbf, gf, tf, and KN are interchanged.
6. Three displacement units mm, cm and in are interchanged.
7. Up to 10 sets of test points can be customized, and the corresponding qualification interval judgment can be set.
8. Test data are presented in Linear dispersion and tabular form.
9. The test interface can display real-time force value, real-time displacement, spring height (height test), deformation value (deformation test), test time, test point stiffness and average stiffness.
10. The device comes with its own memory function and overload protection function.
11. After the test is completed, the data bar is automatically saved, and the system can save 10,000 test data.
12. Built-in micro-printer allows for direct printing of tests.
Principle
The testing machine is loaded with a stepper motor, and the High Accuracy Sensor measures the Response of the spring under the set displacement or force value to obtain data such as displacement, deformation, tensile force and spring coefficient. The system automatically controls the loading process according to the set test mode (such as the fixed height force measurement value), and displays, records and analyzes the real-time data through Touchscreen.
Applications
Industrial and mining enterprises, technical supervision, commodity inspection and arbitration, research institutes, Universities & colleges, Quality control units
Standards
JB-T7796-2005, national standard, ISO, JIS, ASTM, DIN
Steps
1. Connect the AC 220V 50HZ power supply.
2. Select the test mode through the 7-inch Touchscreen (fixed height force measurement value, fixed deformation force measurement value, fixed force value to measure height, fixed force value to measure deformation).
3. Set the force value units (N, kgf, lbf, gf, kN, tf) and displacement units (mm, cm, in).
4. Customize test points (up to 10 groups) and qualification intervals as needed.
5. Test speed (0-500mm/min range).
6. Install the spring or component to be tested.
7. Start the test, and the equipment automatically loads and displays data such as force value, displacement, height, deformation, time, stiffness, etc. in real time.
8. After the test is completed, the data is automatically saved and the results can be printed using the built-in microprinter.
Notice
• Please ensure that the power supply is AC 220V 50HZ.
The equipment has an overload protection function, but it is still necessary to be careful not to exceed 5000N range.
• Please set the test direction (pressure or tension) and unit correctly before testing.
The system can save 10,000 pieces of data, please pay attention to regular data management.
• Follow the safety regulations provided by the equipment when operating.