Overview
CHENCHI WDB-010 (400mm) Peel strength tester is a test equipment specially designed for universities and research institutes. It has a beautiful appearance, easy operation, stable and reliable performance. The equipment can realize a variety of tests such as tensile strength, 180 ° Peel Strength and sealing strength. It adopts servo motor drive and precision screw drive. It has the characteristics of no pollution, low noise, high efficiency and wide speed range. It is widely used in Building materials, aerospace, machinery manufacturing, Wire and cable, rubber plastics, Spinning & weaving, home appliances and other industries. Material inspection analysis.
Features
1. Adopt five-inch color LCD touch screen operation, the interface is intuitive and convenient
2. Measurement range of test force up to 1000N, accuracy better than indication +/- 1%
3. Stepless speed regulation system, speed range 1~ 500mm/min, suitable for a variety of testing requirements
4. Equipped with overload protection, leakage protection and limit protection to ensure safe operation
5. The host design is compact, the size is 500 * 420 * 1550mm, and the weight is about 80Kg, which is easy to install and move
6. The effective stroke and stretch space are both 400mm, and customization is supported to meet special requirements
Principle
The system controls the servo motor to rotate through the CHENCHI controller and speed control system. After deceleration by the deceleration system, the beam is driven up or down by the precision screw pair to complete the tensile mechanical properties test of the sample. This process realizes High Accuracy force value measurement and displacement control to ensure the accuracy and Reliability of the test data.
Applications
Building materials, Aerospace, Machine building, Wires and cables, Rubber plastics, Spinning & weaving, Home appliances
Standards
GB 8808、GB/T 1040.1、GB/T 1040.2、GB/T 1040.3、GB/T 1040.4、GB/T 1040.5、GB/T 4850、GB/T 12914、GB/T 17200、GB/T 16578.1、GB/T 7122、GB/T 2790、GB/T 2791、GB/T 2792、GB/T 17590、ASTM E4、ASTM D882、ASTM D1938、ASTM D3330、ASTM F88、ASTM F904、JIS P8113、QB/T 2358、QB/T 1130
Steps
1. Turn on the power supply and ensure that the voltage is 220V 50Hz.
2. Set test parameters such as speed and force range through a five-inch color LCD touchscreen
3. Install the specimen and adjust the beam position to the appropriate tensile space
4. Start the test, and the system automatically controls the servo motor to drive the beam movement
5. Real-time monitoring of test force, displacement, and peak data
6. After the test is completed, the device automatically stops and saves the data
Notice
• Check the power connection before operation to avoid the risk of leakage
• Ensure that the specimen is firmly installed to prevent peeling during the test
• Do not touch moving parts during equipment operation to prevent injury
• Regular maintenance of deceleration system and screw pair to ensure transmission accuracy
• In case of overload or abnormality, use the protection function to stop the device immediately
• Compatibility needs to be confirmed with the supplier when customizing the itinerary
