Overview
The UPTM-A20 Ultra Pure Water Machine is a desktop device suitable for use in Quality control institutes, drug laboratories, biochemical meters, chemical plants, Universities & colleges, biological research, environmental monitoring, and routine laboratories with low water consumption and low frequency of water use.
Features
1. Full plastic shell, mold molding at one time
2. Microcomputer-controlled LED color screen display, fully automatic water production
3. Double water outlet, can produce UP water and RO water at the same time
4. Real-time display of rinsing, water production, full water, water shortage, and maintenance status
5. Automatic regular flushing, water shortage self-protection
6. The water is automatically turned on, and the machine is automatically stopped without water.
7. Quick connector imported from Taiwan, easy to plug and unplug
8. Fully enclosed pipeline design to maintain stable water quality at all times
Principle
After the tap water is pretreated by PP Filter, granular activated carbon, and sintered activated carbon, it is pressurized into the RO reverse osmosis (RO) membrane by a booster pump, and then stored in a high voltage bucket.
Applications
Quality control institutes, drug laboratories, biochemical laboratories, chemical plants, Universities & colleges, biological research, environmental monitoring, routine laboratories
Standards
American Rohm and Haas nuclear-grade mixed bed column, American fluid FCS company RO membrane, delta high voltage silent pure water pump, American KFLOW company automatic control system, Taiwan CCK RO pipe and quick connector
Steps
STEP 1 Connect to tap water sources
2. Connect the 220V/50HZ power supply
3. The device automatically detects and enters the standby state
4. Automatically turn on water production when taking water
5. Automatic shutdown when water is not fetched
6. The system automatically flushes regularly without manual operation
Notice
- The water source needs to be urban tap water, TDS should be < 200ppm, and if TDS > 200PPM, a water softener is required
- The water inlet pressure should be kept within the range of 1~ 4kg/cm ²
The inlet water temperature should be controlled between 5 and 45 degrees Celsius
The equipment is automatically protected in the event of a water shortage without human intervention
- Make sure the power supply is 220V/50HZ before use to avoid voltage discrepancies
- Regularly check the equipment status display and deal with abnormal situations in a timely manner
