Overview
Tianma FA1205AN Electronic Balance is a dual range series of products, using high stability Electromagnetic Force Sensor technology, with a novel Appearance, Interior volume, stable performance, complete features.
Features
1. High accuracy: High Accuracy Electromagnetic Force equilibrating Sensor, high measurement result accuracy, fast response speed and fewer faults.
2. Optimized micro-loading weighing function: Digital processing technology is used to greatly improve the Response speed of micro-loading while maintaining the stability of Balance reading, which is suitable for powder and liquid micro-loading.
3. Built-in weighing function: with basic weighing function, piece weighing function, percentage weighing function.
4. Balance internal calibration: support automatic built-in weight calibrating.
5. Dual range weighing.
6. The highest accuracy is 0.01mg.
7. Transparent Glass Draft Shield.
8. LCD liquid crystal display.
9. Unique split design.
10. Built-in RS232 communication interface.
11. Overload protection.
12. Fault detection function.
13. Overload protection, percentage display.
14. Unit conversion function.
Principle
The Electronic Balance uses high stability electromagnetic force equilibrating Sensor technology for weighing.
Applications
Powder and liquid micro-sampling
Steps
1. Turn on the power supply and preheat for 30-60 minutes.
2. Fully automatic built-in weight calibrating.
3. Select the weighing function according to your needs (basic weighing, piece weighing, or percentage weighing).
4. Place the sample for weighing.
5. Read data through the LCD liquid crystal display, or transfer data through the RS232 interface.
Notice
• Ambient Temperature should be kept at + 10~ + 30 ℃.
• The working environment humidity should be kept at 20~ 85% relative humidity (non-condensing).
• Power frequency is AC230V, 50-60HZ.
• When weighing in pieces, the minimum weight is 0.1mg, and the reference quantity can be selected from 5, 10, 20, 50, 100.
• Please ensure that the Balance is stable before use. The stabilization time is 2.5 seconds or 15 seconds depending on the range.
• Pay attention to the overload protection function to avoid overload use.
