Overview
Tianma FA1205B 1/100,000th Electronic Balance adopts High Stability Electromagnetic Force Sensor technology, with novel Appearance, large Interior volume, stable performance and complete functions. The dual range series design provides accurate weighing and is suitable for a variety of application scenarios.
Features
1. High accuracy: High Accuracy Electromagnetic Force equilibrating Sensor, Precision measurement results, fast response speed, less faults.
2. Optimized micro-loading weighing function: Digital processing technology is used to greatly improve the Response speed of micro-loading while maintaining the stability of Balance reading, which is suitable for powder and liquid micro-loading.
3. Built-in weighing function: basic weighing function, piece weighing function, percentage weighing function.
4. Electromagnetic force equilibrating Sensor.
5. Dual range weighing.
6. The highest accuracy is 0.01mg.
7. Glass windshield.
8. LCD liquid crystal display.
9. Unique split design.
10. Built-in RS232 communication interface.
11. Fault detection function.
12. Overload protection, percentage display.
13. Unit conversion function.
Principle
High Accuracy Weighing Based on Electromagnetic Force Equilibrating Sensor Technology. Digital Processing Optimizes Microsample Response to Ensure Reading Stability and Fast Response.
Applications
powder micro-sample addition, liquid micro-sample addition, piece weighing, percentage weighing
Steps
1. Preheat: Preheat for 30-60 minutes after turning on the power supply.
2. Select range: Select 120g or 51g range as required.
3. Place the sample: Place the sample on the φ 90mm stainless steel pan.
4. Read the result: View the weighing result through the LCD liquid crystal display, and the stabilization time is about 2.5 seconds or 15 seconds.
5. Use function: Select the basic weighing, piece weighing or percentage weighing function as required.
6. Data transmission: Connect external devices through the built-in RS232 communication interface.
Notice
• Operating temperature range is + 10~ + 30 ℃ to ensure that the environment temperature is suitable.
• The relative humidity should be kept at 20~ 85% non-condensing state to avoid moisture affecting the accuracy.
• Ensure preheating is completed before use to improve measurement accuracy.
• Avoid overloading to prevent damage to the Sensor.
• Periodically calibrate using 100g E2 test weight.
• Keep the windshield clean and make sure the Clear Glass does not affect the reading.
• Power supply voltage is AC230V, 50-60HZ to ensure voltage matching.
