Overview
The LS127C ultraviolet irradiometer is an integrated instrument specially used for the measurement of the irradiation intensity of UVC sterilization lamps, which is simple and convenient to operate. The instrument has Bluetooth communication function and can be connected to the mobile app to realize long-distance real-time monitoring, so that the tester can stay away from ultraviolet radiation damage, fully refer to the detection requirements of "WST 367-2012 ** Institution Disinfection Technical Specifications", and distribute a 1-meter test hook to ensure compliance with the standard.
Features
1. Adopt integrated design, easy to operate
2. Comes with Bluetooth function, which can wirelessly monitor data from a long distance to avoid ultraviolet burns
3. Equipped with a 1-meter test hook, which meets the standard testing requirements
4. It can be set to automatically shut down for 1-255 minutes, automatically save test data, and record up to 9 sets of data
5. Using High Accuracy UVC Filter and Professional UV Sensor to Eliminate the Influence of UVA and UVB Bands
6. Using digital probe technology, signal processing is completed directly on the probe, with strong anti-interference and high accuracy
7. With intelligent statistical data function, real-time statistical power real-time value, MAX Maximum, MIN Minimum, average value, measurement time and energy accumulation value
8. Equipped with USB communication interface and dedicated PC software, support report printing
Principle
The instrument adopts High Accuracy UVC Filter and Professional UV Sensor, and completes digital signal processing directly on the probe through digital probe technology, eliminates the influence of light intensity in UVA and UVB bands, and realizes accurate measurement of the irradiation intensity of 254nm UVC sterilization lamp.
Applications
CDC, pharmaceutical companies, FDA, environment monitoring stations
Standards
"WST 367-2012 ** institutional disinfection technical specifications" A.3 ultraviolet disinfection effect monitoring, "JJG 879-2015 ultraviolet radiation luminometer verification procedures"
Steps
1. After turning on the UV Lamp for 5min, place the instrument probe at the center of the vertical distance of 1m under the UV lamp to be inspected
2. After the instrument is stabilized, the data shown in the reading is the irradiance value of the UV Lamp
Notice
• In use, the irradiation intensity of UV Lamp ≥ 70μW/cm ² is qualified; the irradiation intensity of 30W high-intensity UV lamp ≥ 180μW/cm ² is qualified
• Use environment: temperature (0~ 40) ℃, humidity < 85% RH
