Overview
HZC-B1404 Ultrasonic Cleaner is a liquid crystal intelligent mute device using advanced ultrasonic technology. It converts high-frequency oscillation signals into mechanical oscillations through a transducer, generating a large number of micro bubbles in the cleaning liquid, using the "cavitation" effect Impact the surface of the object, effectively disbonding dirt, analysis of grease, and efficient cleaning. The device has high cleaning rate and less residue, especially suitable for cleaning deep holes, blind holes, grooves and other complex shapes.
Features
1. LCD display: blue background light, clear and bright, one-click start.
2. Minimalist design: circular dial, press selection, swirl/spin adjustment.
3. Mode optional: standard, silent, degassing three cleaning modes.
4. Power adjustable: 30~ 100% ultrasonic power adjustment.
5. Temperature adjustable: room temperature to 100 ° C.
6. Timing adjustable: 1 to 99 minutes, support normally open continuous work.
7. Intelligent memory: Automatic memory of working parameters when powered off or shut down.
8. Real-time display: set temperature, current water temperature, remaining time, etc.
9. Body: Unique square texture, beautiful anti-fingerprint, lower sound operation.
10. Inner tank: thickened SUS304 stainless steel, acid and alkali resistance and anti-corrosion.
11. Voltage: 220 + 10% V AC, 50/60Hz.
12. Protection: leakage protection, overcurrent voltage, temperature protection.
Principle
Ultrasonic Cleaner converts the high-frequency oscillation signal sent by the ultrasonic generator into high-frequency mechanical oscillation through the transducer, which is transmitted to the inner tank to initiate the flow of the cleaning solution and generate tens of thousands of micro-bubbles. These micro-bubbles produce a strong "cavitation" effect under the action of the sound field, constantly Impact the surface of the cleaning part, disbonding peeling the insoluble dirt from the surface, and at the same time, it can analyze and emulsify the greasy dirt, so as to achieve the purpose of purifying the cleaning part.
Applications
Precision cleaning of samples and instruments, sample pretreatment (liquid degassing, defoaming, mixing, homogenization, emulsification), accelerated chemical reaction and solution neutralizing, dissolving of Chinese herbal medicines, particle dispersion and emulsification extraction, Universities & colleges, R & D institutions, military industry, microelectronics, physical and chemical laboratories, biochemical laboratories, Optical inspection laboratories, chip laboratories
Steps
1. Add an appropriate amount of cleaning liquid to the cleaning tank.
2. Put the items that need to be cleaned into the tank.
3. Set the Operating Mode (Standard, Mute, Outgassing) through the Circular Dialer.
4. Set the required ultrasound power (30 to 100%), temperature (room temperature to 100 ° C), and timing time (1 to 99 minutes or normally open).
5. Press the one-button start button to start working.
6. After cleaning is completed, remove the items and drain the waste liquid through the drain valve.
Notice
• Make sure the equipment is well grounded before use and check whether the Power frequency meets the requirements (220V +/- 10%).
• Do not start the ultrasonic and heating functions when there is no liquid in the tank to avoid damage to the equipment.
• The cleaning fluid level should at least submerge the transducer (usually recommended to submerge the cleaning object), but should not exceed the maximum capacity of the inner tank.
• Please choose the appropriate cleaning liquid according to the material of the cleaning object and the nature of the stain, and avoid using highly corrosive or flammable and explosive liquids.
• Do not put your hands directly into the cleaning liquid you are working with during operation.
• The equipment has a variety of protection functions. In case of abnormal automatic shutdown, please check the cause before using it.
• Regularly clean the inner tank and keep the equipment drying. When not in use for a long time, please empty the liquid and store it properly.
