Overview
HZC-B80030 Ultrasonic Cleaner is a liquid crystal intelligent silent device, using advanced ultrasonic technology and digital circuits, with strict quality control. The device converts high-frequency electrical signals into mechanical oscillations through ultrasonic transducers, generating a large number of micro-bubbles in the cleaning liquid. Impact the surface of the object with the "cavitation" effect, effectively disbonding stains and analyzing grease. It has the characteristics of high cleaning rate and less residue, especially suitable for cleaning deep holes, blind holes and other complex shapes.
Features
1. LCD display: blue background light, clear and bright, one-click start.
2. Minimalist design: circular dial, press selection, swirl/spin adjustment.
3. Mode optional: standard, silent, degassing three cleaning modes.
4. Power adjustable: Ultrasonic power can be adjusted within the range of 30 to 100%.
5. Temperature adjustable: The heating temperature can be adjusted from room temperature to 100 ° C.
6. Timer Adjustable: Timer Range 1~ 99 minutes, support normally open continuous work.
7. Intelligent memory: Automatic memory of working parameters when powered off or shut down.
8. Real-time display: It can display information such as set temperature, current water temperature, and remaining time.
9. Body: Unique square texture, beautiful anti-fingerprint, helps to lower the sound operation.
10. Inner tank: Thickened SUS304 stainless steel is used to resist acid and alkali corrosion.
11. Voltage: 220V +/- 10% AC, 50/60Hz.
12. Protection: with leakage protection, as well as overcurrent, overvoltage, and overtemperature protection.
Principle
Ultrasonic Cleaner converts the high-frequency oscillation signal sent by the ultrasonic generator into high-frequency mechanical oscillation through the transducer, which is transmitted to the inner tank to initiate the flow of the cleaning solution and generate tens of thousands of micro-bubbles. These micro-bubbles produce a strong "cavitation" effect under the action of the sound field, constantly Impact the surface of the cleaning part, disbonding peeling the insoluble dirt from the surface, and at the same time, it can analyze and emulsify the greasy dirt, so as to achieve the purpose of purifying the cleaning part.
Applications
Precision cleaning of samples and instruments, sample pretreatment (liquid degassing, defoaming, mixing, homogenization, emulsification, etc.), accelerated chemical reactions, solution neutralizing, dissolving of Chinese herbal medicines, particle dispersion and emulsification extraction, Universities & colleges, R & D institutions, military, microelectronics, physicochemical, biochemical, Optical inspection, chip and other laboratories
Steps
1. According to the cleaning needs, press the selection and swirl/spin adjustment through the circular dialer to set the cleaning mode (standard, silent, degassing).
2. Set the required ultrasonic power (30 to 100%), heating temperature (room temperature to 100 ° C), and timing time (1 to 99 minutes or normally open) through the dialer.
3. Add the appropriate cleaning solution to the thickened SUS304 stainless steel inner tank.
4. Put in the items to be cleaned.
5. Start the device with one click, and the device will start working and display the set temperature, current water temperature, and remaining time in real time.
6. After cleaning is completed, the equipment stops working and the cleaning liquid can be discharged through the drain valve.
Notice
• Please ensure that the voltage used is 220V +/- 10% AC and the frequency is 50/60Hz.
• Please select the appropriate cleaning mode, power and temperature according to the cleaning object and stain type.
Equipment with leakage, overcurrent, overvoltage, overtemperature protection, but still need to pay attention to safe operation.
• The inner tank is acid and alkali resistant SUS304 stainless steel, but it is still recommended to avoid long-term immersion in a highly corrosive cleaning solution.
• The device supports intelligent memory function, and can automatically restore the last working parameters after power failure or shutdown.
• Please clean the inner tank in time after use to keep the equipment clean.
