Overview
UC-120VDEB dual-frequency ultrasonic cleaner is a high-efficiency cleaning equipment from the JINGQI brand, with dual-frequency conversion function, suitable for a variety of cleaning needs. The equipment is made of high-quality stainless steel and is equipped with an intelligent control system to provide accurate cleaning time and temperature control.
Features
1. Support 25kHz and 45kHz dual-band conversion options
2. The total working time setting range is 1-600 minutes
3. The LCD screen displays the ultrasonic cleaning time and countdown in real time
4. Equipped with a dedicated stainless steel mesh blue and flat cover
5. The inner and outer shells and the sound lowering cover are made of high-quality stainless steel
6. Real-time display of the actual temperature in the cleaning tank
7. Adopt microcontroller software to control the operation program
8. Temperature setting range from room temperature to 80 ° C
9. With power-off memory function for working parameters
Principle
The ultrasonic cleaner uses high-frequency ultrasonic waves to produce cavitation effect in the cleaning liquid, and realizes efficient cleaning of the surface of the article by converting the frequency of 25kHz or 45kHz. The microcontroller software control system precisely manages the cleaning time, temperature and power parameters to ensure the cleaning process is stable and reliable.
Applications
Laboratories, electronics industry, medical equipment, jewelry, precision parts
Steps
1. Inject the cleaning liquid into the cleaning tank to the appropriate level
Select the desired ultrasound frequency (25kHz or 45kHz).
3. Set the cleaning time (1-600 minutes)
4. Temperature range (room temperature to 80 ℃)
5. Place the items to be cleaned in the stainless steel mesh blue
6. Start the equipment and start the cleaning process
7. Take out the items and drain them after cleaning.
Notice
• Make sure the liquid level in the cleaning tank is appropriate before use
• Avoid starting the device in a state where there is no water or the liquid level is too low
• The temperature setting must not exceed the upper limit of 80 ° C
• Regularly clean the inner and outer surfaces of the equipment
• Pay attention to avoid burns during operation
• Power off and drain the cleaning liquid when not in use for a long time
