Overview
LC-101-0 electric air blowing dryer adopts accurate temperature Control system, suitable for electromechanical, chemical, plastic, light industry and other industries and R & D institutions, used for baking, drying, curing, heat treatment and Miscellaneous heating of products and samples. Not suitable for volatile items or strong acid and alkali samples.
Features
1. PID temperature control technology, stable temperature control, built-in LCD LCD display temperature status.
2. The software has functions such as timing, over-temperature alarm, temperature deviation correction, and temperature control self-tuning.
3. Left electric heating tube heating (only 101 models), electric heating tube mass upgrade, not easy to leak and short circuit during operation, safe to use.
4. The fan that can be switched on and off independently is resistant to high temperature and corrosion, and the noise does not exceed 50dB when working.
5. The studio is made of high-quality stainless steel plate or galvanized plate, with a four-corner arc design. Shelf can be freely loaded and unloaded, making it easy to clean.
6. Adopt double-decked thickened Glass large window for easy observation of the indoor situation.
7. The cold-rolled steel shell is treated by electrostatic spraying, which is resistant to corrosion and aging.
8. Using silicone rubber sealing strip, it can run at high temperature for a long time, has a long service life and is easy to replace.
9. Thickened stainless steel is trending, beautiful and anti-corrosion.
Principle
The drying oven is heated by an electric heating tube on the left side, and an independently controlled blower is used to promote air circulation in the box, so that the heat is evenly distributed. PID temperature control technology monitors and adjusts the temperature in real time to ensure that the temperature in the working room is accurate and stable.
Applications
Electromechanical, chemical, plastic, light industry, R & D institutions
Steps
1. Place the equipment in a smooth, well-ventilated environment.
Connect the AC220V 50Hz power supply.
3. Turn on the power switch and set the required temperature, time and other parameters through the LCD screen.
4. Turn on or off the blower as required.
5. Put in the sample to be treated, noting that the sample should not be volatile or strong acid or alkali substances.
6. Close the box door and the equipment starts working.
7. After the work is completed, remove the sample and power off the device.
Notice
• It is not suitable for volatile items or strong acid and alkali samples to avoid explosion.
• Do not touch the heating parts while the equipment is running.
• When placing samples, make sure not to exceed the maximum load-bearing capacity of the shelf (15Kg).
• When cleaning the studio, disconnect the power and wait for the equipment to chill down.
• Regularly check the sealing strips and electrical components to ensure the safe operation of the equipment.
