Overview
LICHEN LC-202-00 electric air blowing dryer is a heating treatment equipment with precise temperature Control system, widely used in electromechanical, chemical, plastic, light industry and other industries and R & D institutions. It is suitable for baking, drying, curing, heat treatment of products and samples. This product is not suitable for volatile items or strong acid and alkali samples to avoid explosion.
Features
1. Using PID temperature control technology, the temperature control is more stable, and the built-in LCD LCD screen displays the temperature status.
2. The software has functions such as timing, over-temperature alarm, temperature deviation correction, and temperature control self-tuning.
3. Left electric heating tube heating (only 101 models), no heat source at the bottom, electric heating tube mass upgrade, not easy to leak and short circuit during operation, safer to use.
4. The fan that can be switched on and off independently is resistant to high temperature, corrosion and durability, and the noise does not exceed 50dB when working (measured at 5cm on the front of the box when running at full Power).
5. The studio is made of galvanized sheet, with a four-corner arc design. Shelf can be freely loaded and unloaded, making it easy to clean.
6. With double-decked thickened Glass large window, the indoor situation is clear at a glance.
7. The cold-rolled steel shell adopts electrostatic spraying treatment process, which is resistant to corrosion and aging.
8. The silicone rubber sealing strip can run at high temperature for a long time, has a long service life and is easy to replace.
9. Thickened stainless steel is trending, beautiful and anti-corrosion.
Principle
The electric air blowing dryer generates heat through the electric heating tube on the left (only 101 models), which is combined with the fan that can be switched on and off independently for blowing, so that the hot air circulates inside the studio for uniform heating. The core PID temperature Control system monitors the temperature through the built-in Sensor and automatically adjusts the Heating power to maintain the stability of the set temperature.
Applications
Electromechanical, chemical, plastic, light industry and other industries, R & D institutions
Steps
Place the device in a smooth, well-ventilated environment and connect it to an AC220V 50Hz power supply.
2. Turn on the power switch and set the required temperature (RT + 5~ 300 ° C) and timing time (up to 9999 minutes) through the LCD screen.
3. The fan function can be turned on or off independently as required.
4. Place the sample to be processed on a freely removable shelf and close the box door.
5. The device starts to work, and the PID system automatically controls the temperature. Users can observe the internal situation through a large window.
6. After the set time is reached or the processing is completed, turn off the power of the equipment and take out the sample after it is chilled down.
Notice
• This product is not suitable for volatile items or strong acid and alkali samples to avoid explosion.
• Please ensure that the equipment is placed in a smooth and well-ventilated environment for use.
• Please pay attention to high temperature during operation to avoid burns.
• When cleaning, please disconnect the power first and wait for the equipment to chill down completely.
• The maximum load-bearing capacity of the shelf is 15Kg, please do not overload.
• Regularly inspect sealing strips and electrical components to ensure safety.
