Overview
TAISITE WGL-65T electric air blowing dryer is a vertical drying equipment using PID intelligent temperature control technology, which has the characteristics of uniform temperature, convenient operation and safety and reliability. Its studio volume is 65L, Temperature range RT + 10~ 300 ℃, suitable for drying all kinds of samples.
Features
1. Adopt PID intelligent temperature control to quickly reach the set value and operate stably
2. Convenient operation, support fixed-value operation, regular operation, automatic stop and scheduled start
3. Special function keys to achieve temperature setting, auxiliary menu provides over-rise alarm, deviation correction and menu lock function
4. Vertical double air duct air sleeve design, turbine centrifugal forced air supply to ensure uniform temperature
5. Speed control fan design, suitable for lightweight, fine, powdery samples
6. Forced fan cooling intake structure, fan maximum Operating temperature < 50 ℃, prolong service life
7. Insulation door technology, the outer door temperature is low and does not deform when used at high temperature
8. Pull-out tray Shelf design, easy and fast to take samples
9. Self-developed digital display overlift preventer, accurate and stable temperature control, safe and reliable
10. With over-lift alarm, menu lock and over-lift prevention functions
Principle
The equipment is heated by stainless steel heating pipe through forced convection of double air ducts, and the turbine centrifugal fan forces the air to form a uniform hot air circulation. The PID intelligent temperature control system precisely adjusts the temperature to ensure that the studio temperature is stable at the set value.
Applications
Laboratory sample drying, material heat treatment, industrial product drying, scientific research experiment
Standards
ZL201630486063.2、ZL201320059701.3、ZL201921000740.X、ZL201920940767.0、ZL201921001075.6
Steps
1. Turn on the power supply and turn on the device switch
2. Set the required temperature value through the touch screen
3. Select the operation mode (fixed value operation or regular operation)
4. Set the timing time (0-9999 minutes)
5. Start the device and start running
6. The device automatically stops after running
Notice
• Power supply voltage meets AC220V requirements before use
• Do not touch high-temperature parts while the device is running
• Regularly check the operating status of the fan
• Sample weight must not exceed 15kg Load per shelf
• Keep equipment well ventilated
• Clean the studio promptly after use
