Overview
TAISITE WGL-625T electric air blowing dryer is a vertical drying equipment using PID intelligent temperature control. It has the characteristics of rapid heating, uniform temperature and convenient operation. It is suitable for drying and heating treatment in laboratories, industries and other fields.
Features
1. Adopt PID intelligent temperature control to quickly reach the set value and operate stably.
2. Convenient operation, support fixed-value operation, regular operation, automatic stop, and appointment start.
3. Special function keys to achieve temperature setting, auxiliary menu provides over-rise alarm, deviation correction, menu lock function.
4. Vertical double air duct air jacket, turbine centrifugal forced air supply to ensure uniform temperature.
5. Speed control fan design, suitable for light, small, powdery samples.
6. Forced fan cooling intake structure, fan maximum Operating temperature below 50 ℃, prolong service life.
7. Insulation door technology, using the outer door at high temperatures is low and does not deform.
8. Pull-out tray Shelf design, take the sample convenient and fast.
9. Self-developed digital display overlift preventer, accurate, stable, safe and reliable temperature control.
10. With over-rise alarm, menu lock, over-rise prevention function.
Principle
The drying oven precisely adjusts the temperature through the PID intelligent temperature control system, adopts the upper air duct rotary air supply mode, and the turbine centrifugal forced fan drives the hot air circulation to ensure the uniform temperature distribution inside the studio. The heating element is a stainless steel heating tube, combined with the heat dissipation intake structure, to achieve efficient heating and stable operation.
Applications
Laboratory, industry, scientific research, education, medicine, chemical industry, food, electronics
Steps
1. Turn on the power supply and set the temperature and time parameters.
2. Select the operation mode (fixed-value operation, scheduled operation, reservation start).
3. Start the device and monitor the temperature display and operating status.
4. After the run, it will automatically stop and take out the sample.
Notice
• Power supply voltage check before use.
• Avoid overloading. Load per shelf is 15kg.
• Do not touch the outer door during high temperature operation to prevent burns.
• Regularly clean and maintain equipment to ensure the normal operation of the fan.
• In case of a rising alarm, check and correct the settings in time.
