Please contact customer service
Composite explosion-proof technology such as explosion-proof and pouring seal is adopted, and the key components are explosion-proof treated. Temperature range RT + 10~ 300 ℃, Temperature Uniformity +/- 2.5%. Equipped with explosion-proof fan, heating pipe and Sensor, color LCD controller for precise temperature control, and outer door with observation window.
Category : Drying Oven
Brand : TaiSiTe
SKU : NB043024
Service :The delivery and service By NBCLab.Com
The TAISITE TEX-230LG-30L explosion-proof vertical blast drying oven is a laboratory equipment designed for use cases where there is a risk of explosive environments. It uses composite explosion-proof technology to ensure safe operation in potentially hazardous conditions such as high temperature, static electricity or sparks, and is suitable for drying, heating and other treatments of materials.
1. Adopt explosion-proof type, pouring and other composite explosion-proof technologies, the electrical appliances are explosion-proof as a whole, and the explosion-proof control box is centrally protected. 2. The liner is made of stainless steel, which is not easy to clean and pollute. 3. The box is vertical design, using Cold rolled steel plate material, surface resistance painting. 4. Use explosion-proof 304 stainless steel heating pipe heating. 5. Equipped with explosion-proof fan, explosion-proof Sensor, explosion-proof structure design. 6. Color LCD controller, accurate temperature control. 7. Tempered Glass is installed on the outer door, which is convenient for checking the experimental status at any time. 8. Easy to operate, support fixed-value operation, regular operation, and automatic stop. 9. Auxiliary menu provides over-rise alarm, deviation correction, menu lock function. 10. Key components (heaters, electrical appliances, circuits) are cast and encapsulated and protected by electrostatic isolation. 11. The line connection part is treated with explosion-proof pouring protection. 12. Exposed cables are made of explosion-proof flexible connecting pipe sets to isolate static sparks and temperature leakage. 13. Safety protection: electric heating short circuit protection, power off circuit protection, over temperature protection alarm, over rise alarm, menu lock.
The drying oven generates heat through an explosion-proof stainless steel heating tube, which is driven by an explosion-proof fan to circulate the air in the box, so that the temperature of the studio is uniform. The color LCD controller precisely adjusts the temperature to achieve the set temperature Linear dispersion. The equipment features an overall explosion-proof design, including an explosion-proof shell, cast-sealed electrical components and explosion-proof connections, ensuring that in an explosive environment, arcs, sparks or high temperatures that may be generated internally will not ignite the external environment.
Materials drying, heating, curing, aging testing, etc. in the fields of chemical, petroleum, pharmaceutical, military, scientific research and other fields with explosive gas environments
JJF1101-2003 "Specification for temperature and Humidity calibrating of environmental test equipment", JB/T5520-91 "Technical conditions for drying ovens", GB3836.1-2020 "Explosive environment Part 1: General requirements for equipment", GB3836.2-2020 "Explosive environment Part 2: Equipment protected by explosion-proof enclosure" d ", GB3836.3-2020" Explosive environment Part 3: Equipment protected by increased safety type "e", GB3836.9-2020 "Explosive environment Part 9: Equipment protected by pouring type" m "
1. Connect the explosion-proof power supply that meets the requirements. 2. Turn on the power switch of the device. 3. Set the required temperature, time, and other parameters through the color LCD controller. 4. You can choose a fixed-value operation or a timed operation mode. 5. Start the equipment and start heating and blowing. 6. The internal state can be observed through the tempered Glass door during operation. 7. After the operation is completed, the device can be automatically stopped. 8. After the temperature in the box has dropped to a safe range, the sample can be taken out by opening the door.
* Equipment must be used in explosive environments that meet its Explosion-proof level EX d e mb IIB T4 Gb. Please read and understand all Safety Instructions and Operation Manual before installation and operation. Make sure the power connection is correct and use the explosion-proof flexible connecting tube and latch specified by the device. * When the equipment is running, do not open and close the door frequently to avoid affecting Temperature uniformity and safety. * When placing the sample, the maximum load of the single shelf should not exceed 15kg, and the air duct should not be blocked. The equipment is equipped with an independent temperature limit protector and over-temperature alarm, but the operator still needs to pay close attention to the operation status. * Before performing maintenance or cleaning, the power must be cut off and the equipment must be completely chilled down. Non-professional personnel are not allowed to disassemble or modify any explosion-proof components and wiring. If there is a malfunction alarm (such as an over-lift alarm), the cause should be immediately investigated, and it should not be forced to run before Troubleshooting.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
