Overview
The paper shaper JWJ01A1 is an all-electric controlled laboratory equipment that integrates vacuum suctionfiltration forming, pressing and vacuum drying. It is mainly used to manually copy Pulp made of fibers such as plants and minerals into round sheets with a diameter of 200mm, and perform rapid vacuum drying to prepare paper samples for physical testing. The equipment is suitable for forming and drying of various microfibers, nanofibers and ultra-thick sheets.
Features
1. Integrated design of copying and vacuum drying.
2. Equipped with white water circulation function.
3. Adopt electric sizing method.
4. Support compressed air homogenization, manual homogenization and quick water release.
5. Equipped with microfiber and ultra-thick sheet forming aids.
6. The countertop is made of stainless steel (304L), the drying body is equipped with resilience suction flattening device, the paper sample drying Film thickness can reach 10mm, Vacuumpump with automatic anti-oil return device, and equipped with external water source quick connector.
7. Easy to operate, users only need to plug in the power supply and connect the water source quick connector to work.
8. Using three-stage centrifugal special Vacuumpump, using Venturi tube principle and centrifugal vacuum technology to generate high negative pressure, with small size, compact structure, large pumping capacity, high Vacuum Level, no maintenance and can work in harsh environments.
Principle
Stir standard pulp into a sheet-copying cartridge, then form a round wet sheet by rapid suctionfiltration. The wet sheet is then pressed and vacuum dried on the device to form a drying pattern that can be used for physical inspection.
Applications
Laboratory pattern preparation, microfiber forming, nanofiber forming, ultrathick sheet forming
Standards
QB/T3703-1999、ISO 5269/2、ISO 5269/3、NBR 14380/99、TAPPI T-205、DIN 54358、ZM V/8/76
Steps
1. Plug the device into the power plug.
2. Connect the water source quick connector.
3. Stir the standard dredged Pulp into the sheet barrel.
4. Perform rapid suctionfiltration molding.
5. Press the formed wet paper sheet.
6. Carry out vacuum drying.
Notice
Equipment needs to be connected to a continuous water source.
• The maximum drying temperature should not exceed 120 ° C.
• The drying time (for Basis Weight 30-80g/m ²) is usually 4-6 minutes.
Please pay attention to the dimensions and weight of the equipment to ensure the installation space and load-bearing capacity.
