Overview
TAISITE 202-3AB (with program mode) electric thermostatic drying oven is a device using natural convection drying method, suitable for drying, baking, heat treatment and other purposes. Its studio volume is 225 liters, and the temperature control range is room temperature + 10 ° C to 250 ° C. It has functions such as fixed value operation, regular operation and automatic stop.
Features
1. The shell is made of good Cold rolled steel plate, and the surface is treated by lame plating process; the studio is made of stainless steel or Cold rolled steel plate, and treated by anti-corrosion process.
2. The intelligent temperature controller uses a PID control program with dual digital display, with timing function and accurate temperature control.
3. The middle of the box door is equipped with a double-decked tempered Glass observation window, which can observe the situation of the heating items in the working room at any time.
4, the door with silicone rubber sealing, sealing effect is good.
5. Convenient operation, support for fixed-value operation, regular operation, and automatic stop.
6. Dedicated function keys enable temperature setting.
7, auxiliary menu, achieve over-rise alarm, deviation correction, menu lock.
8. Equipped with safety features, such as over-lift alarm and menu locking.
9. Standard program mode, single-stage temperature control and program temperature control can be converted to each other, 50 experimental programs can be stored, each program can be set to 50 steps, and each step can be set to 0-6000 minutes adjustable.
Principle
The drying oven uses the classic natural convection drying method. Heat is generated through the nickel-chromium alloy heating wire OCr27A17Mo2 heater, and the heat is naturally circulated in the box, so that the temperature of the studio rises evenly. The intelligent PID temperature controller monitors the temperature in real time through the pt100 temperature sensor and precisely controls the heating output to maintain the set temperature value and achieve thermostatic drying.
Applications
Drying, baking, heat treatment
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the power supply (AC 220V).
2. Set the required temperature and time by tapping the four buttons (Timer Range 0~ 9999 minutes, with timing waiting function).
3. Select the operation mode (fixed-value operation, regular operation, or program temperature control mode).
4, start the equipment, start heating.
5. Internal items can be observed through the double-decked tempered Glass observation window.
6. After the operation is completed, the device automatically stops.
Notice
Equipment should be placed in a smooth, well-ventilated environment.
• Load per shelf (15kg).
• Power supply voltage is AC220V before use.
• When the equipment is running, do not open and close the box door frequently, so as not to affect the temperature Stability.
• When cleaning, please disconnect the power supply and wipe with a soft cloth to avoid the use of corrosion cleaners.
• If you need to use an exhaust port or test hole, make sure it is unobstructed.
• Pay attention to the safety device of the equipment. If there is an over-rise alarm, check the setting parameters or equipment status.
• Menu lock function prevents misoperation, please manage it properly.
• When not in use for a long time, please disconnect the power supply.
