Overview
The TAISITE GP-30BE (with programmed mode) drying/foster dual-use box is a multifunctional laboratory equipment that integrates drying, baking, wax, heat treatment and bacterial foster functions. It uses a vertical double air duct air jacket and a turbine centrifugal forced air supply design to ensure uniform temperature inside the box, and is equipped with a PID temperature controller for High Accuracy Temperature Control.
Features
1. One box is multi-purpose, which can be used for drying, baking, melting wax, heat treatment and bacterial fostering.
2. High Accuracy, Efficiency, Safety and Wide Application Range.
3. Easy to operate, support fixed-value operation, regular operation, and automatic stop.
4. Adopt PID temperature controller for accurate temperature control.
5. Special function keys to set the temperature, auxiliary menu to achieve over-rise alarm, deviation correction, menu lock.
6. Vertical double air duct air sleeve, turbine centrifugal forced air supply, Temperature uniformity is better.
7. Speed-regulating fan design, suitable for lightweight, fine, and powdery samples.
8. Forced fan cooling intake structure to ensure long-term operation of the fan at < 50 ° C.
9. LCD multi-data full-screen operation display, with power outage memory and power outage compensation functions.
10. Standard overlift preventer to enhance safety.
Principle
The device is heated by stainless steel heating pipe or nickel-chromium alloy heating wire (according to the model), and the temperature is precisely adjusted by PID control algorithm. The interior adopts double air duct forced convection mode, and the turbine centrifugal fan forces the air to form a uniform temperature field. The speed regulating fan can adjust the wind speed according to the characteristics of the sample to ensure the heat treatment or foster effect. Control system supports program mode, which can store and run multi-stage temperature programs.
Applications
Drying, baking, wax, heat treatment, bacterial fostering
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply.
2. Set the target temperature and time by tapping the four buttons.
3. Select the operation mode (fixed-value operation, scheduled operation, or program operation).
4. Start the equipment, the fan starts to work, and the heating system runs according to the set program.
5. The device will automatically stop after running, or stop after reaching the set time.
Notice
• Power supply voltage is AC220V/50-60Hz.
• The maximum load of a single shelf is 15kg, do not overload.
• Operating temperature range of drying mode is 80~ 250 ℃, foster mode is RT + 5~ 80 ℃, please do not use beyond the range.
• There is an exhaust port (inner diameter 28mm) on the top of the equipment, please ensure smooth ventilation.
• Please confirm that the safety device (over-lift alarm, over-lift preventer) is functioning normally before use.
• When fostering bacteria, please pay attention to cleaning and avoid cross-contamination.
• When the equipment is running, do not switch the box door frequently, so as not to affect the Temperature uniformity and control accuracy.
Before moving or cleaning equipment, be sure to disconnect the power supply.
