Overview
TAISITE WHL-125B (with program mode) Electric thermostatic drying oven is a High Accuracy, safe and reliable laboratory equipment. It uses digital tube dual-row PID control, Temperature range (RT + 10~ 300 ℃), Temperature Fluctuation is small (+/- 1.0 ℃), and standard program mode, support fixed value operation, timing operation and automatic stop function.
Features
1. High Accuracy, Effective, Safe and Wide Range.
2. Convenient operation, support fixed-value operation, regular operation, and automatic stop.
3. Dedicated function keys to achieve temperature setting.
4. Auxiliary menu to achieve over-rise alarm, deviation correction, menu lock.
5. Double-decked insulation door design, good insulation effect.
6. Vertical double air duct air jacket, turbine centrifugal forced air supply, uniform temperature.
7. Multifunctional exhaust hole design.
8. Multi-layer space Multi-layer Shelf design, Shelf spacing can be adjusted to facilitate the placement of experimental items of different heights.
9. Standard program mode, single-stage temperature control and program temperature control can be converted to each other, 50 experimental programs can be stored, and each program can be set to 50 steps.
10. With power outage compensation and power outage memory functions.
Principle
The drying oven generates heat through nickel-chromium alloy heating wire (OCr27A17Mo2), and uses natural convection or turbine centrifugal forced air supply to enable domestic circulation of hot air in the studio (liner is stainless steel plate). The temperature is detected by the Pt100 Sensor and precisely adjusted by the digital tube dual-column PID controller to achieve the set temperature Linear dispersion or thermostatic state.
Applications
Laboratory sample drying, material heat treatment, component aging, industrial baking, scientific research experiment
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC220V power supply.
2. Set the target temperature and time (Timer Range 0~ 9999 minutes) by tapping the four buttons.
3. Select the operation mode: set-value operation, regular operation or call the preset program to run.
4. Start the device, the device will operate according to the set parameters, and will automatically stop when the set time or conditions are reached.
5. Operations such as deviation correction and menu locking can be carried out through the auxiliary menu.
Notice
* Power supply voltage is AC220V and matches Device power requirements.
* Load per shelf is 15kg, do not overload.
The equipment is equipped with an over-lift alarm safety device. Do not turn it off at will during operation.
Please confirm that the exhaust port is unobstructed before use.
* Cold rolled steel plate painting to avoid contact with corrosion chemicals.
When setting the temperature or editing the program, please pay attention to the operation steps.
Before moving or cleaning equipment, be sure to disconnect the power supply.
