Please contact customer service
Adopting vertical double air duct turbine centrifugal forced air supply technology, Temperature Uniformity up to +/- 2.5%, equipped with speed regulating fan to handle light and small samples, forced cooling structure to ensure the longevity of the fan.
Category : Drying Oven
Brand : TaiSiTe
SKU : NB043115
Service :The delivery and service By NBCLab.Com
TAISITE GX65B (with program mode) Hot Air Sterilizer is a vertical double air duct forced convection sterilizing equipment, using turbine centrifugal forced air supply technology to ensure uniform temperature in the furnace. The equipment has a variety of operation functions such as fixed value operation, timing operation, automatic stop, etc., and comes standard with program mode, which can realize the conversion between single-stage temperature control and program temperature control, and supports the storage of up to 50 experimental programs to meet complex experimental needs.
1.Quickly, safely and reliably sterilize. 2. Convenient operation, support fixed-value operation, regular operation, and automatic stop. 3. Special function keys to achieve temperature setting, auxiliary menu supports over-rise alarm, deviation correction, menu lock. 4. Vertical double air duct air jacket, turbine centrifugal forced air supply, more uniform temperature. 5. Speed control fan design, suitable for light, small, powdery samples. 6. Forced fan cooling intake structure to ensure that the maximum fan Operating temperature < 50 ℃, to achieve longevity. 7. LCD multi-data control panel (BE model), supports power outage memory and compensation. 8. Equipped with multi-functional safety locks and heat-insulated safety doors to enhance operational safety. 9. Linear dispersion diagram of the temperature rise in the furnace shows that the temperature control is accurate and professional.
The hot air sterilization box adopts a dual air duct forced convection method, which generates hot air through stainless steel heating pipes and is forced to circulate by a turbine centrifugal fan to make the hot air evenly distributed inside the studio. The equipment monitors the temperature in real time through the Pt100 temperature sensor, and uses the PID control algorithm to precisely adjust the Heating power to maintain the set temperature value. The speed regulating fan can adjust the wind speed according to the characteristics of the sample to ensure the effective sterilization of different samples.
Laboratory sample sterilization, medical apparatus sterilization, powder material processing, light and small items drying
Not mentioned
1. Connect the AC 220V power supply. 2. Set the target temperature and time (0-9999 minutes) by tapping the four buttons. 3. Select the operation mode: fixed-value operation or regular operation. 4. If you need program temperature control, you can call or set the stored program (up to 50 programs, 50 steps per program). 5. Start the device, and the device will automatically run until the set conditions stop. 6. During operation, the real-time temperature and set temperature can be observed through the control panel.
• Operating temperature of the equipment is 300 ℃, do not use over temperature. • The maximum load of a single shelf is 15kg, do not overload. • Equipment is equipped with over-lift alarm function, if triggered, please check in time. • Please ensure that the exhaust port (top φ 28mm) is unobstructed before use. Cold rolled steel plate painting to avoid contact with corrosion chemicals. • Do not stand around the instrument for a long time during operation, despite the insulated safety door design. • When performing deviation correction or menu locking, please refer to the instructions. • Non-BE models do not have the function of power outage compensation, and the program needs to be reset after a power outage.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
