Please contact customer service
Adopt PID temperature control, Temperature Fluctuation +/- 1 ℃, resolution 0.1 ℃, standard program mode can store 50 experimental programs. 4-sided heating design, equipped with bulletproof tempered Glass observation window and thickened Shelf to ensure long-term stable sealing.
Category : Drying Oven
Brand : TaiSiTe
SKU : NB043121
Service :The delivery and service By NBCLab.Com
TAISITE DZ-1A IV (with program mode) Vacuum oven is designed for drying heat-sensitive, easy analysis and easy oxidation substances. It can be filled with inert gas in the working room to prevent oxidation of substances. It adopts PID temperature control instrument, accurate temperature control, and has program mode, which can realize complex temperature control process.
1. Adopt PID temperature controller for accurate temperature control. 2. With program mode, single-stage temperature control and program temperature control can be converted to each other, and 50 experimental programs can be stored. Each program can be set to 50 steps, and each step can be set to 0-6000 minutes. 3. Adjustable door lock, self-adaptive observation window frame, one-time forming silicone sealing strip to ensure long-term stable sealing. 4. Special function keys to achieve temperature setting, auxiliary menu to achieve over-rise alarm, deviation correction, menu lock. 5. Adopt Independent Thickened Removable Shelf and Thickened Insulated Glass Observation Window Design. 6. With deviation correction, menu button lock, power outage compensation, power outage memory and other additional functions. 7. Adopt stainless steel heating pipe 4-sided Heating mode, uniform temperature.
The Vacuum oven extracts the air in the working room through a vacuum pump to reduce the air pressure, thereby reducing the boiling point of the water and allowing the material to dry quickly at a lower temperature. At the same time, stainless steel heating pipes on the four walls of the box provide heat sources, and the temperature is precisely controlled by a PID temperature controller. Users can choose to run at a fixed value or in a program mode. The program mode allows users to set the multi-stage heating, heat preservation and cooling process, which is suitable for complex process requirements.
It is suitable for drying treatment of heat sensitive substances, easy analysis substances and easy oxidation substances.
Not mentioned
1. Place the sample: Place the sample to be dried on the shelf. 2. Close the door: ensure that the door lock is tightened and the sealing strip is effectively sealed. 3. Setting parameters: Set the temperature, time or select the preset program through the touch button of the control panel. 4. Start the vacuum: Connect the vacuum pump and start vacuuming to the required Vacuum Level (< 133Pa). 5. Start heating: start the equipment and start heating operation. 6. Process monitoring: Monitor the drying process through observation windows and meters. 7. End the operation: After the program runs, turn off the heating first, slowly release the vacuum after the temperature drops, and finally open the box door to take out the sample.
• Make sure the equipment is well grounded and use the specified Power supply voltage (AC220V). • When placing samples, the maximum load of a single shelf should not exceed 15kg, and the airflow channel in the working room should not be blocked. • The operation should be slow and smooth when vacuuming and breaking the vacuum to avoid severe pressure changes affecting the sealing of the sample or equipment. • During the drying process, do not open the observation window frequently, so as not to affect the temperature and Vacuum Level in the box. When the equipment is running, the surface temperature of the box may be high, do not touch it, and keep the surrounding well ventilated. • If inert gas needs to be filled, it should be filled slowly after vacuuming. • Before cleaning the equipment, be sure to cut off the power and allow it to chill down completely. • If there is an abnormal alarm (such as an over-rise alarm), it should be checked and troubleshooted immediately.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
