Overview
TWG-5032L high temperature drying oven is a device with program mode, which can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, but also with Sensor boot self-diagnosis, over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. 4 casters are given as a gift, which is convenient for product movement and has a locking switch.
9. Security: over-rise alarm, menu lock.
Principle
The equipment adopts convection mode of forced hot air circulation, performs PID logic operation through intelligent microcomputer integrated temperature control system, and precisely controls the heating of stainless steel heating pipe to realize the set temperature Linear dispersion and thermostatic process.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Turn on the power supply.
2. Set the temperature, thermostatic time and other parameters through the color LCD screen.
3. You can choose a fixed-value operation or a timed operation mode.
4. The device starts to work, and automatically stops or enters the next program segment after reaching the set conditions (if using program mode).
5. After the work is completed, turn off the power supply.
Notice
• Power supply voltage is 220V 10A.
• Load per shelf is 10kg, do not overload.
• The long-term use temperature of the equipment should not exceed 480 ° C.
• Note that the equipment has over-temperature alarm function, please deal with the alarm in time.
• When moving the device, use casters and pay attention to locking.
• Do not block the top φ 40mm exhaust port.
