Overview
TWG-5050L high temperature drying oven is a equipment that can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test. It adopts intelligent microcomputer integrated temperature control system and has program mode, which can carry out high temperature heat resistance test and heat treatment at 400 ℃/500 ℃/600 ℃ and below.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, Sensor boot self-diagnosis and over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. Complimentary 4 casters with locking switch for easy movement.
9. Equipped with safety functions such as over-rise alarm and menu lock.
10. Standard program mode.
Principle
The high temperature drying oven works by forced hot air circulation. Its core is an intelligent microcomputer integrated temperature control system that precisely controls the Heating power through PID logic operations. The stainless steel heating tube generates heat, which forms a uniform hot air circulation under the action of the fan, ensuring Temperature uniformity in the working room. The system continuously monitors and adjusts the temperature to achieve the set temperature Linear dispersion or thermostatic process.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Standards
The data did not mention specific compliance criteria.
Steps
1. Turn on the power supply.
2. Set the required temperature, time and other parameters through the color LCD screen.
3. If the program needs to run, set up a multi-segment program.
4. Start the device, and the device starts to heat up and run.
5. After the operation is completed, the device can be set to stop or alarm.
6. After the temperature in the box drops to a safe range, open the door and take out the sample.
Notice
The long-term operating temperature of the equipment is 480 ° C. Do not exceed this limit.
• Load per shelf is 10kg, do not overload.
• Pay attention to whether the over-temperature alarm function is normal when using it.
• After closing the door, ensure that the inverted door lock automatically locks to ensure sealing.
When moving equipment, use casters and pay attention to locking.
• When cleaning the liner, use its rounded corner design and avoid using corrosion cleaners.
• The equipment has an over-lift alarm function, if triggered, please check it in time.
• Optional accessories such as independent temperature limiting controllers can enhance safety as needed.
