Overview
TWG-4225L high temperature drying oven is a high temperature heat treatment equipment with program mode, which can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, Sensor boot self-diagnosis and over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. Complimentary 4 casters with locking switch for easy movement.
9. Equipped with safety functions such as over-rise alarm and menu lock.
Principle
The equipment adopts forced hot air circulation convection mode, and precisely controls the stainless steel heating pipe heating through the intelligent microcomputer temperature control system, so that the air in the working room is evenly heated to achieve the set temperature Linear dispersion and process requirements.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Turn on the power supply and set the temperature, time and other parameters through the color LCD screen.
2. You can choose to run at a fixed value or in program mode (standard).
3. The equipment starts to work, heating and forcing hot air circulation.
4. After reaching the set time or the end of the program, the equipment stops heating.
5. After the temperature drops to a safe range, open the door and remove the sample.
Notice
• Power supply voltage is 220V.
• Load per shelf is 10kg, do not overload.
• The recommended temperature for long-term use should not exceed 380 ° C.
When the equipment is running, do not open the door frequently.
• Please confirm that the door lock is closed and automatically locked before use.
• Note that the exhaust port (φ 40mm) on the top of the device is unobstructed.
• When moving the device, use casters and confirm the lock switch status.
