Overview
TWG-5225L high temperature drying oven is a device with program mode, which can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, Sensor boot self-diagnosis and over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. Complimentary 4 casters with locking switch for easy movement.
9. Equipped with safety functions such as over-rise alarm and menu lock.
Principle
The equipment adopts the convection mode of forced hot air circulation, and precisely controls the stainless steel heating pipe heating through the intelligent microcomputer integrated temperature control system (PID logic operation) to achieve the set temperature Linear dispersion, and has the function of program mode operation.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Connect the 380V power supply.
2. Set parameters such as temperature and thermostatic time through the color LCD screen or select the program mode.
3. Start the device, and the device will operate according to the settings, with functions such as timing and self-tuning.
4. After the operation is completed, shut down the device according to the procedures.
Notice
• Power supply voltage of the equipment is 380V, please make sure the power supply matches.
• Load per shelf is 10kg, do not overload.
• Note that the long-term use temperature of the equipment is 480 ° C, do not exceed this limit.
• The equipment has over-temperature alarm function, please check and deal with it in time when alarming.
• When closing the door, pay attention to the automatic lock of the inverted door lock to ensure sealing.
• When moving the device, use casters and pay attention to locking.
• Optional accessories (such as independent temperature limit controller, inert gas Control system, etc.) should be configured according to actual needs.
