Overview
The TR 2001 series high speed dissolver is a versatile device mainly used in the dispersion, Stir and Sanding process of liquid or powder materials. It features a double-decked wall water circulation barrel design to effectively control material temperature and avoid overheating or caking problems, and is equipped with a wide speed range and manual lifting function.
Features
1. Wide speed range, maximum spindle speed up to 9000 rpm
2. Easy to display and operate, using frequency converter for speed regulation
3. Using high-mass motor, the use process can ensure a certain Temperature range
4. Low noise, low vibration, long service life
5. The barrel adopts double-decked wall water circulation and quick joint design
6. Users can freely replace the dispersed disc or grinding disc
Principle
The Disperser drives the spindle to swirl/spin at high speed through the motor, and drives the dispersion disc or grinding disc to Stir, grind and disperse the material. The double-decked wall water circulation barrel design can control the material temperature, and the frequency converter speed can precisely adjust the speed according to the process requirements.
Applications
Coatings, dyestuffs, inks, pigments, paper, cosmetics, food, Resin, Adhesives, emulsions, petroleum, pesticides, daily chemicals
Steps
1. Select the appropriate dispersion plate or grinding plate according to the material and install it
2. Put the material into the double-decked wall water circulation drum
3. Use the manual lift function to adjust the barrel position
4. Set the appropriate speed through the frequency converter
5. Start the device for Disperse, Stir or ground operation
6. Turn off the equipment and clean it after the operation is completed
Notice
• Power supply voltage meets equipment requirements (220V, 50Hz) before use
• Pay attention to material temperature control to avoid overheating
• Select the appropriate dispersion plate size according to the material characteristics
• Pay attention to safety during operation and avoid contact with high-speed swirling/spinning parts
• Regularly check the operating status of the equipment to ensure normal use
