Overview
The TRUIT TR 3001/100/15 Single Sided Applicator is a device for precise control of wet-film or dry-film thickness. In routine quality control and R & D tests, the device ensures good conformity and Repeatability of coatings, suitable for testing Coatings for hiding power, opacity, scrub resistance, sag resistance performance, etc. The Applicator is made of high-quality wear-resistant and corrosion-resistant alloy steel, with an effective Spreader width of 100mm, a total length of 130mm, and a wet film thickness of 15μm. It supports manual or automatic Film Applicators and is widely used in Coatings, Polymer Materials, Adhesive, inks and other fields.
Features
1. Made of high-quality wear-resistant and corrosion-resistant alloy steel, with strong durability
2. Spreader width 100mm, total length 130mm, compact design
3. Single-sided Film Applicator, wet film thickness 15μm, precise control of Coating thickness
4. Support manual film or use with automatic Film Applicator, flexible operation
5. Suitable for a variety of materials, such as Coatings, Polymer Materials, Adhesives, inks, etc
6. Provide non-standard customized services to meet individual needs
Principle
The single-sided film Applicator precisely controls the film thickness of wet-film or Dry-Film through its single-sided structure. During the Spreader process, the Applicator uniformly Spreaders the material with a fixed Film thickness (e.g. 15 μm) to ensure the conformity and Repeatability of the coating, which can be used for subsequent mass testing and performance testing.
Applications
Coatings, Polymer Materials, Adhesives, inks
Steps
1. Prepare materials to be tested, such as Coatings or Adhesives
2. Place Single-Sided Applicators on Substrate
3. Spreader Manually or with Automatic Film Applicator
4. Spreader uniformity to form wet-film of desired Film thickness
5. Follow-up drying or performance testing as required
Notice
• Check Applicator for cleanliness before use to avoid contamination of coatings
• Spreaders maintain uniform strength to ensure consistent Film thickness
• Suitable for wet-film or dry-film control, paying attention to material properties
• Avoid humid and corrosive environments during storage to extend service life
• Non-standard customization needs to confirm the specifications in advance
