Overview
TRUIT TR 3001/100/75 Single Sided Applicator is a thin layer plating coating applicator for precise control of wet-film or Dry-Film film thickness. The device is suitable for routine quality control and R & D tests for hiding power, opacity, scrub resistance, sag resistance and Miscellaneous mass testing of coatings, requiring good conformity and Repeatability of the coating.
The TR 3001 series is a single-sided Film Applicator with an effective Spreader width of 100mm and a total length of 130mm. It is made of high-quality wear-resistant and corrosion-resistant alloy steel. The single-sided Applicator has only one film Film thickness, which can be manually filmed or used with an automatic Film Applicator. It is suitable for preparing uniform film coatings such as Coating, Polymer Materials, Adhesive, inks, etc., to detect coating performance. In addition, the Applicator supports non-standard customization.
Features
1. Precise control of wet-film or dry-film thickness;
2. Made of high-quality wear-resistant and corrosion-resistant alloy steel;
3. Applicator has only one film Film thickness;
4. Can be manually filmed or used with an automatic Film Applicator;
5. Support non-standard customization.
Principle
The single-sided Applicator uses the coating applicator to uniformly Spreader Coating on the substrate, controlling the wet film thickness to 75 μm to ensure the conformity and Repeatability of the coating. It is suitable for manual or automatic film operation, for preparing uniform films to detect coating performance.
Applications
Coatings, Polymer Materials, Adhesives, inks
Steps
1. Preparation of Substrates and Coatings;
2. Applicator is placed on the substrate;
3. Manual or Automatic Film Applicator Spreader;
4. Ensure that the Spreader width is 100mm and the wet film thickness is 75μm;
5. Test coating performance after completion of Spreader.
Notice
• Ensure Applicator is clean and free of contamination before use;
• Spreader to maintain uniform strength to avoid uneven Film thickness;
• Regularly check Applicator abrasion;
• Non-standard specifications need to be confirmed in advance;
• Avoid long-term storage in corrosive environments.
