Overview
TR 3004/80/1 4-sided Applicator is a TRUIT brand wet Film Applicator, suitable for Coatings, Adhesive, inks and other coatings. It is made of high-quality wear-resistant and corrosion-resistant alloy steel, which can provide uniform and consistent coatings, and achieve different film thicknesses on different specimen surfaces. Film thickness is 5, 10, 15, 20 μm, Spreader width is 80mm. The device can precisely control the film thickness of wet-film or Dry-Film, and is often used for quality control and research and development tests to ensure the conformity and Repeatability of Coating hiding power, opacity, scrub resistance, sag resistance performance and other tests.
Features
1. Made of high-quality wear-resistant and corrosion-resistant alloy steel, with strong durability
2. Provide uniform and consistent coatings with good Repeatability
3. Film thicknesses can be realized on different sample surfaces
4. Film Film thickness precision control, suitable for wet-film or Dry-Film
5. Spreader width 80mm, total length 110mm, compact design
Principle
The 4-sided Wet Film Applicator uses its specific Film thickness Spreader structure to uniformly Spreader Coating, Adhesive or inks and other materials on the surface of the sample to form a wet-film of uniform Film thickness. By adjusting the different Film thickness surfaces of the coating applicator, the preparation of different film film thicknesses is realized, and the conformity and Repeatability of the coating are ensured to meet the needs of quality control and research and development.
Applications
Coatings, Adhesives, inks
Steps
1. Select the desired film Film thickness surface
2. Place the coating applicator on the specimen surface
3. Spreader the coating applicator evenly
4. Operate repeability as needed to verify conformity
Notice
Make sure the coating applicator is clean before use to avoid impurities affecting the film mass
• Maintain uniform force during operation to ensure consistent Coating thickness
• Adjust the Spreader speed according to the surface characteristics of the sample to prevent sagging or irregularity
• Regularly check the coating applicator abrasion, timely maintenance to maintain accuracy
