Overview
TRUIT TR 3004/80/2 4-sided Applicator is a 4-sided wet Film Applicator for Coatings, Adhesive, inks and other coatings. It provides uniform, consistent coatings and film thicknesses of different film thicknesses on different specimen surfaces. It is made of high-quality wear-resistant and corrosion-resistant alloy steel, film Film thickness is 10, 20, 30, 40 μm, Spreader width is 80mm.
Features
1. Made of high-quality wear-resistant and corrosion-resistant alloy steel to ensure durability.
2. Provide uniform and consistent coatings to improve experimental Repeatability.
3. Film thickness films can be realized on different sample surfaces to meet various needs.
4. Precise control of film Film thickness, support 10, 20, 30, 40 μm multiple options.
5. Spreader width is 80mm, total length 110mm, easy to operate.
Principle
4-Sided Wet Film Applicator uniformly Spreader wet-film on the surface of the sample through mechanical structure, using different Film thickness settings to achieve precise control, ensure the conformity and Repeatability of the coating, suitable for quality control and research and development tests.
Applications
Coatings, Adhesives, inks
Steps
1. Preparation of Samples and Coatings.
Select the desired film Film thickness (10, 20, 30 or 40 μm).
3. Place the coating applicator on the surface of the specimen.
4. Spreader the coating applicator evenly.
5. Check coating uniformity and record results.
Notice
• Make sure the coating applicator is clean before use to avoid impurities affecting the coating mass.
• Keep uniform push during operation to prevent uneven coating.
• Select the appropriate film Film thickness according to the experimental requirements.
• Regularly check the coating applicator abrasion and maintain it in time.
• Avoid long-term storage in corrosive environments to extend service life.
