Overview
TRUIT TR 3004/80/9 4-sided Applicator is a 4-sided wet Film Applicator for the preparation of various coatings and coatings, including Coatings, Adhesives, inks, etc. It can provide uniform and consistent coatings, and can achieve different film thicknesses on different specimen surfaces. It is made of high-quality wear-resistant and corrosion-resistant alloy steel. The film thickness is 100, 200, 300, 400 μm, and the Spreader width is 80mm.
Features
1. Made of high-quality wear-resistant and corrosion-resistant alloy steel to ensure durability and corrosion resistance performance.
2. Provide uniform and consistent coatings to improve experimental Repeatability.
3. Film thickness films can be realized on different specimen surfaces, supporting 100, 200, 300, 400 μm Film thickness options.
4. Spreader width is 80mm, suitable for routine quality control and research and development tests.
Principle
The 4-sided Wet Film Applicator precisely controls the Spreader process to form a wet-film or Dry-Film on the surface of the specimen to achieve precise control of the coating thickness. It ensures uniform Spreader through mechanical structure, helping users evaluate Coating's hiding power, opacity, scrub resistance, sag resistance performance and other indicators in quality control and R & D.
Applications
Coatings, Adhesives, inks
Steps
1. Prepare Samples and Coating Materials.
Select the desired film Film thickness (100, 200, 300 or 400 μm).
3. Spreader the coating applicator evenly on the surface of the sample.
4. Check the uniformity of the coating to ensure that it meets the experimental requirements.
Notice
• Make sure the coating applicator is clean before use to avoid impurities affecting the coating mass.
• Spreader process to maintain uniform strength to prevent Coating thickness inconsistency.
• Regularly check the coating applicator abrasion, timely maintenance to maintain accuracy.
• Coatings and coatings are only applicable to specified materials and should not be used beyond the scope.
