Overview
The TR 5502/600 single-sided wet film is a tool for measuring Coating wet film thickness, also known as a wet film thickness gauge or wet-film thickness caliper. It is widely used in Coating construction, quality control and Coating Film thickness measurement to help monitor Coating construction mass and conformity to ensure Coating Film thickness meets expected requirements.
Features
1. The thickness measurement range is 25 to 600 μm, and the Graduation is 25 μm.
2. Made of corrosion-resistant stainless steel, the structure is simple and practical.
3. With a series of teeth arranged at the edge, the reference teeth form a Baseline, and the inner teeth mark the gap depth value.
Principle
When using a wet-film thickness gauge, the measurement head is gently placed on the wet Coating surface to ensure that the Coating fully contacts the scale line side of the measurement head, and then reads the scale line position on the dial in contact with the Coating to obtain the wet Coating Film thickness value.
Standards
GB/T 13452、ASTM D4414、ISO2808
Steps
1. Place the measurement head gently on the wet Coating surface.
2. Ensure that the Coating is in full contact with the scale line side of the measurement head.
3. Read the scale line position on the dial in contact with the Coating.
4. Film thickness value of wet Coating.
Notice
• Make sure the measurement head is clean before use.
• Handle with care when placing to avoid damage to the Coating surface.
• When reading the scale, make sure that the Coating is in full contact with the scale line.
