Overview
The BLD-602 carton compression machine is a factory direct sales test equipment with a test space of 60 * 80 * 60cm, using microcomputer control, which can carry out carton static pressure test. The equipment can be selected from 1000KG or 2000KG, with an accuracy of less than +/- 0.5%. Equipped with LCD display and printing function, it is suitable for pressure performance testing of Encasement transportation parts.
Features
1. Microcomputer control, with three standard working modes
2. Strength test can measure the maximum pressure resistance and displacement of the box
3. The fixed value test can detect the overall performance of the box according to the set pressure and displacement
4. The stacking test can be tested under different conditions such as 12 hours and 24 hours according to national standards
5. The test space can be customized, and the unit can be switched between KG, N, and LB
6. Equipped with data printing function, can record serial number, peak value, average value
Principle
The equipment applies pressure to the carton through a motor-driven compression device, and uses a High Accuracy Sensor to monitor the pressure value and displacement in real time. The microcomputer system controls the compression speed and processes the data, automatically completes the test process according to the set test mode (strength test, fixed value test or stacking test), and finally displays and prints the test results through LCD.
Applications
Encasement Transportation Parts Test, Carton Mass Inspection, Logistics Encasement Verification
Standards
GB/T 4857.4-92 Encasement Transport Encasement Parts, Pressure Test Method, GB/T 4857.3-92 Encasement Transport Encasement Parts, Static Load Stacking Test Method
Steps
1. Connect the 3 * AC 220V power supply
2. Select the test mode (strength test, fixed value test or stacking test)
3. Set the corresponding parameters (pressure, displacement or stacking time)
4. Place the carton in the test space
5. Start the test program
6. Observe the LCD display data
7. Read and print the results after the test is completed
Notice
• The weight of the equipment reaches 480KG, and it is necessary to ensure that the installation ground is flat and stable
• Before use, check whether the power supply meets the requirements of 3 ° AC 220V
• The size of the test space is 600 * 800 * 600mm, please do not use it beyond the size
The compression speed should be kept within the standard range of 10mm/min +/- 3
• Regularly check the accuracy of the equipment to ensure the accuracy of the test results
• Pay attention to safety during operation and avoid hands entering the test area
