Overview
The OSP-25 L720φ 10 is a formed coating rod made of 304 stainless steel. The product uses cold extrusion technology to form concave-convex wavy Linear dispersion on the surface of the steel rod, replacing the traditional wire-wound bar, for precise control of wet film thickness of 25 μm Spreader applications.
Features
1. No Wire Loose or Fracture Risk, Ensure Spreader Stability
2. Linear dispersion on the surface, easy to clean and maintain
3. Support ultra-thin film Spreader, up to 2μm minimum
4. Made of 304 stainless steel, with strong durability
5. Different mountain structures can be selected according to the substrate and coating liquid
6. Special spiral direction combination design to reduce bubble mixing
Principle
OSP Grooved Rods uses the principle of metal plastic deformation to cold-extrude concave-convex wavy Linear dispersions on the surface of steel rods through precision molds. These Linear dispersions perform the same Spreader function as traditional wire-wound bars, but without the need to wrap steel wires, the flow and thickness distribution of the Spreader fluid are controlled by the mountain structure.
Applications
Spreader Processing, Film Spreader, Calender Roller Processing, Synthetic resin Coating Application
Steps
1. Select the appropriate OSP bar model according to Spreader requirements
2. Install the bar to the Spreader device to ensure that both ends are firmly clamped
3. Adjust Spreader parameters, including Spreader speed and pressure
4. Spreader operation
5. Clean the bar surface in time after completion
Notice
• When cleaning, it is recommended to soak and wipe with suitable solvents such as alcohol
• Pay attention to protect the bar surface Linear dispersion structure to avoid hard object scratches
• Different types of bars correspond to different wet film thicknesses, which need to be selected on demand
• Appearance of the product is subject to the actual product, and the pictures are for reference only.
Store in a humid and corrosion environment
